I need hp slate 7 2800 original firmware
-
-
Re: Hp slate 7 2800 firmware
http://h10025.www1.hp.com/ewfrf/wc/s...t=5376605#N147
I found it 2 sec next time google it m8 -
Re: Hp slate 7 2800 firmware
Click on previous versions. There is an .img inside the update.zip.Comment
-
Re: Hp slate 7 2800 firmware
Maybe checkout XDA Developers then ? you might need a modified rom if you're using the rockchip tool.Comment
-
Good day folks. A friend of mine told me his Sonoff 4CH light switch recently stopped working. It wouldn't respond to any commands and would appear as offline. Not having done any major work on these home automation devices before, we both concluded the firmware got corrupted, so we set about to find a way to reprogram it.
It turns out these things have got a STM32 inside of it and an ESP32, so given the open-source nature of these components, there's a variety of different firmware and interfaces you can upload to them......in theory. Ideally, we wanted to use the original one... -
Hi,
I have an Anker SoundCore 2 (A3105) that I saved from the trash (well, I guess there's a reason why it was supposed to go into the trash...). The problem is that it always turns off after a few seconds (sometimes it stays on a bit longer, between 30 and 60 seconds, but it still turns off). The power light turns on and the bluetooth light starts blinking, but both abruptly turn off again. The "turn off sound" is still played after the lights turn off. Sometimes, it also loops the on-off cycle several times without me pressing any buttons. If I connect an AUX cable, music...08-11-2025, 02:14 PM -
Hi guys.
I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.
So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
Got New chip and writes good.
THE PROBLEM...
It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.
Does anyone have a Good Firmware I can have?... -
I'm currently repairing an MSI Vector GP66 12UHSO laptop with a motherboard reference MS-15441 ver 1.0. The EC chip (ENE KB9548QF2) on the board appears to be damaged and needs to be reprogrammed.
Can someone please send me the firmware (EC/Embedded Controller) or indicate where I can download the correct EC firmware version corresponding to this motherboard model?
I already have access to the BIOS downloads on the MSI support page, but need specifically the EC binary or its equivalent firmware image.
I already downloaded the BIOS update file from msi official... -
Hello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...
Comment