[HELP] ME Region Cleaning Request – Motherboard GK5MP5X 1.0

[Destroyer-Br]

I’m working on a laptop in which I replaced the PCH, but I’m unable to clean or rebuild the Intel ME region using FIT.
When I load my dump into FIT, it only shows the Intel(R) ME Kernel section. The full ME region structure does not appear.

If I manually replace the ME region inside the decomp folder and try to build the image, FIT does generate an outimage.bin, but the file is corrupted.
After flashing it, the board does not power on — no signs of life.

I’ve identified that the issue happens because my original dump does not contain a complete or valid ME region, so FIT cannot reconstruct it properly.
Unfortunately, I cannot re-read the original chip because it has already been overwritten several times.


Device information:

• Model: AVELL A52 LIV
• Serial Number: AVNB2050425
• Motherboard: GK5MP5X 1.0

If needed, I can upload my current dump for analysis.

Thank you in advance.

[mon2]

Wrong forum. Post the above inside the dedicated bios sub-forum. See above.

[reformatt]

MOD's will move it to the BIOS forum. Even with a dirty ME, it should still boot if you PCH replacement is ok just very slowly to first come on. It all appears ok to me - perhaps you aren't doing it correctly? Only replace ME Sub Partition.bin in the decomp folder with your virgin ME (e.g. 14.0.31.1120_CON_H_A_PRD_RGN.bin).