Urgent Plz HP Victus 15-fb0039ne

[ebrahemcs]

Hello Everyone,

I need your help plz

After bios update, laptop not booting up, power light working but only i get black screen

Model Name : HP Victus 15-fb0039ne
S/N : 5CD30740K7
ProdID : 7Y7G6EA#ABV

My Bios bin in attachments

Thanks in advance

[peste]

Hello Everyone,

I need your help plz

After bios update, laptop not booting up, power light working but only i get black screen

Model Name : HP Victus 15-fb0039ne
S/N : 5CD30740K7
ProdID : 7Y7G6EA#ABV

My Bios bin in attachments

Thanks in advance

you have everything you need at post #49...
https://www.badcaps.net/forum/troubl...us-15-fb/page3

[ebrahemcs]

you have everything you need at post #49...
https://www.badcaps.net/forum/troubl...us-15-fb/page3

nothing helpful for me in that post

thanks anyway

[m1ch43lzm]

Try
Victus Gaming Laptop 15-fb0039ne (7Y7G6EA)
BID 08A3C
BiOS ver. F.22
S/N 5CD30740K7
DMI+Win key 26000-2803F

[ebrahemcs]

Try
Victus Gaming Laptop 15-fb0039ne (7Y7G6EA)
BID 08A3C
BiOS ver. F.22
S/N 5CD30740K7
DMI+Win key 26000-2803F

thank you very much
it's working but there is popup message coming once i turn on the laptop, you will find it in attachments
can you help me with plz

[m1ch43lzm]

You can use HP BCU
https://ftp.ext.hp.com/pub/caps-soft...it/HP_BCU.html

S/N, product ID, model name, feature byte, etc should already be present
Change "Manufacturing Programming Mode" to *Lock (delete the asterisk in front of *Unlock and add it to Lock)

Manufacturing Programming Mode
*Lock
Unlock

MPM should also lock after few reboots and the message will go away

[ebrahemcs]

You can use HP BCU
https://ftp.ext.hp.com/pub/caps-soft...it/HP_BCU.html

S/N, product ID, model name, feature byte, etc should already be present
Change "Manufacturing Programming Mode" to *Lock (delete the asterisk in front of *Unlock and add it to Lock)

Manufacturing Programming Mode
*Lock
Unlock

MPM should also lock after few reboots and the message will go away

Thank you so much
everything is okay now

regards

[ebrahemcs]

You can use HP BCU
https://ftp.ext.hp.com/pub/caps-soft...it/HP_BCU.html

S/N, product ID, model name, feature byte, etc should already be present
Change "Manufacturing Programming Mode" to *Lock (delete the asterisk in front of *Unlock and add it to Lock)

Manufacturing Programming Mode
*Lock
Unlock

MPM should also lock after few reboots and the message will go away

hello

i have one issue now that battery not charging anymore
i already replace the battery 4 times, still i have same issue, one of the batteries have 50% power but once i remove the charger the laptop switched off directly, do you have any idea about this problem
( Before the bios problem the battery was fine )

thanks in advance

[SMDFlea]

hello

i have one issue now that battery not charging anymore
i already replace the battery 4 times, still i have same issue, one of the batteries have 50% power but once i remove the charger the laptop switched off directly, do you have any idea about this problem
( Before the bios problem the battery was fine )

thanks in advance

As the bios is no longer a problem you should start a new topic in laptop troubleshooting if you want help with a hardware problem.

[ebrahemcs]

As the bios is no longer a problem you should start a new topic in laptop troubleshooting if you want help with a hardware problem.

i keep it here because i thought it's related to the bios, before the bios issue the battery was fine

[m1ch43lzm]

May be a coincidence, start by measuring voltage on main power rail with only the battery connected

The BIOS may have corrupted when it was being updated and the charge circuit failed at the same time
Start a new thread in troubleshooting laptops section, to me it looks like an issue with the battery charge circuit