I have a Lenovo laptop :
Lenovo Ideapad S145-15IKB
Model Name: 81VD
SN: PF2DRJX1
i3 8th gen
GS44B/GS54B/NM-C561
REV: 1.0
2019-05-30
that was power cycling, white light on power led turning on and off, fan spinning on and off (the same problem dicky96 had, watch the youtube channel).
Some voltages were present.
I tried downloading and flashing clean bios cscn17ww.bin from post 72 from peste from thread " lenovo IdeaPad S145 bios needed
After the flash i got all voltages except on coil PL5901 and the laptop is not power cycling anymore, the power light stays on, fan spins but i get no picture.
Is running the DMI script necessary or does it only hold data like serial number and so?
Thx in advance
Lenovo Ideapad S145-15IKB
Model Name: 81VD
SN: PF2DRJX1
i3 8th gen
GS44B/GS54B/NM-C561
REV: 1.0
2019-05-30
that was power cycling, white light on power led turning on and off, fan spinning on and off (the same problem dicky96 had, watch the youtube channel).
Some voltages were present.
I tried downloading and flashing clean bios cscn17ww.bin from post 72 from peste from thread " lenovo IdeaPad S145 bios needed
After the flash i got all voltages except on coil PL5901 and the laptop is not power cycling anymore, the power light stays on, fan spins but i get no picture.
Is running the DMI script necessary or does it only hold data like serial number and so?
Thx in advance
Comment