ASUS X512FF Rev 3.1 Help to find the KBC dump

[korsar86]

Asus X512FF (X512FLC) REV 3.1
Help to find the KBC dump for this model.
The laptop works. but there is a problem, after power off it no longer responds to the power button, that is, you have to reset the battery and it turns on again (autostart).
There is also no keyboard backlight and the touchpad does not work.
The multicontroller is responsible for controlling these functions. Before I replace it, I would like to flash it first. thank you

Attached is a picture of the sticker and the native dump.

[shiyab]

Asus X512FF (X512FLC) REV 3.1
Help to find the KBC dump for this model.
The laptop works. but there is a problem, after power off it no longer responds to the power button, that is, you have to reset the battery and it turns on again (autostart).
There is also no keyboard backlight and the touchpad does not work.
The multicontroller is responsible for controlling these functions. Before I replace it, I would like to flash it first. thank you

Attached is a picture of the sticker and the native dump.

post main bios and snid

[korsar86]

post main bios and snid

Unfortunately I can't find the SNID.


The lettering on the case is obliterated


I have attached the original bios dump

[shiyab]

Unfortunately I can't find the SNID.


The lettering on the case is obliterated


I have attached the original bios dump

hi try 256

[jemi]

try

[korsar86]

Unfortunately changing the bios did not help, I will try to change the multicontroller

[Dezolator]

I need new EC firmware for the X512FF rev 3.1 board. The original one is probably defective, the keyboard doesn't work from time to time. The one posted above can no longer be downloaded.

[peste]

I need new EC firmware for the X512FF rev 3.1 board. The original one is probably defective, the keyboard doesn't work from time to time. The one posted above can no longer be downloaded.

post S/N, full name and model, motherboard model, etc.
post bios EC and main...

[Dezolator]

I couldn't read the original EC firmware. The programmer doesn't want to communicate with the chip. It's probably defective. So I can't do anything with it now.