Need bios fujisu lifebook CH55/j
SN: FMVC55JW
every body can help?
thanks!
SN: FMVC55JW
every body can help?
thanks!
-
************************************************** ***********************************
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
************************************************** *********************************** -
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donate -
************************************************** ***********************************
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
************************************************** ***********************************Comment
-
I press the F2 key to enter BIOS setup, but it shows this message, can't access BIOS for setup.Attached Filesif you find these attachements useful please consider making a small donation to the site
************************************************** ***********************************
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
************************************************** ***********************************Comment
-
-
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain... -
Hello everyone,
I need a BIOS dump file for my Fujitsu LIFEBOOK AH47/J laptop.
Motherboard model: DAFH6BMB6A0
The system BIOS got corrupted and now the laptop powers on but does not boot.
I already tried the official Fujitsu support site, but the downloadable BIOS is only in .exe format and does not contain the raw .bin file needed for programming the BIOS chip directly with a programmer (CH341A).
If anyone has a working BIOS dump (.bin) for this model, please share it.
Thanks in advance!... -
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...
Comment