Laptop not booting after reading/fashing bios chip

[Buzzfuzz2k]

Hello

I had a laptop working (booting ok) but it was bios password lock.
I have dumped a bios chip GD25LB64C, modified the bin and injected back. (I have made the mistake to not unselect "OTP secu R" on read & flash).

Computer power led was lighting up but no screen at all (no logo or else), then computer led stop a few min later.

I tried to flash back the original unmodified dump, but same problem.... Computer doesn"t start.

Now i have an error on verify process (I try different thing (even erase the chip before)

Pins Detected Passed!

ID ......OK!

Erase ...Succeeded. Time : 9.265 S

Data Protect Disable...OK!

Programming FLASH ...Succeeded. Time : 29468ms

Verifying FLASH ...Succeeded. Time : 3968ms

Programming STATUS REG ...Succeeded. Time : 0ms

Verifying STATUS REG ...

STATUS REG ERROR at: 0001 Buffer Value :0x02 --- IC Value : 0x3A

Verifying Succeeded. Time : 265ms

Programming ...Failed

Any ideas? thanks

[Vesko356]

Hello

I had a laptop working (booting ok) but it was bios password lock.
I have dumped a bios chip GD25LB64C, modified the bin and injected back. (I have made the mistake to not unselect "OTP secu R" on read & flash).

Computer power led was lighting up but no screen at all (no logo or else), then computer led stop a few min later.

I tried to flash back the original unmodified dump, but same problem.... Computer doesn"t start.

Now i have an error on verify process (I try different thing (even erase the chip before)





Any ideas? thanks

RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Post under a related thread if it exists
• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
• Name your thread with make, full model numbers and request
• Provide a BIOS/EC dump if possible
• Attach files directly to your post instead of linking to external websites

[Buzzfuzz2k]

Hi

thanks for the information, i know it, i didn't provide it because i though it was not relevant as it's just a problem of reading/writting a chip.

I didn't want to give useless informations as i have the program i want to send, but i don't understand where i did a mistake that prevent from booting?

Brand: unowhy
Serial: IFP129034378
Model Y13G011S5EI

[Buzzfuzz2k]

I have managed to remove the error by "unclicking" default activate " Programming Status register."

But laptop is still not booting even with the original file...

I have another laptop (the same) that boot, maybe i can take another dump to send to the non working one? but what option to select to be sure to get things right?

thanks