HP 250 G8 bios password

[farouk_1994]

Hello ii have HP 250 G8 bios password
SN:CND1200FVC

[Nurshad]

HP 250 G8 bios Admin password Remove

S/N CND1113FBN

[minhdigital]

HP 250 G8 bios Admin password Remove

S/N CND1113FBN

Send to you

[Siddig]

HI NEED HELP TO REMOVE BIOS PASSWORD.
MODEL: hp 250 g8
PRODID:4K804EA#ABZ
SN: CND2046WNC
BOARD NO:GPT52 LA-K201P REV 3.0

[SMDFlea]

Thread merged with existing topic.

[SMDFlea]

HI NEED HELP TO REMOVE BIOS PASSWORD.
MODEL: hp 250 g8
PRODID:4K804EA#ABZ
SN: CND2046WNC
BOARD NO:GPT52 LA-K201P REV 3.0

Find and extract a virgin bios, copy your DMI to it,flash the bios, password gone.

[Guide] How to find the right HP bios version to flash
https://www.badcaps.net/forum/troubl...flash?t=122195

[Guide] How to extract ready for programming dump from HP update executable file
https://www.badcaps.net/forum/troubl...-file?t=121948

DMI 500000 - 50103F

.

[cira.dragan85]

I need password for BIOS.
Product
8A682EA
Serial
CND33913M5

[peste]

I need password for BIOS.
Product
8A682EA
Serial
CND33913M5

read the rules..https://www.badcaps.net/forum/troubl...before-posting

post the original bios of the laptop, the motherboard model, the full name and model of the laptop,

etc.

[husnu16]

HP 250 G8 LA-k201P
Serial: CND1180ZTL

please clear my bios password.
thanks everyone

[SMDFlea]

Thread merged.Please make use of the forum search before posting to find related threads where you can post your request.You do not need to start a new thread every time.

[Davidax]

Hope you're having a lovely day!

HP 250 G8
ProdID 2W9A5EA#AKQ
SN# CND14160LZ

Thank you

[peste]

Hope you're having a lovely day!

HP 250 G8
ProdID 2W9A5EA#AKQ
SN# CND14160LZ

Thank you

post the contents of the bios chip even if it is corrupted..

What can we help with? What is your problem?

[grawer]

HP 250 G8 BIOS BLOCKED
prodid 5Z215ES#AKD SN# CND2283YGH
PS. WHERE TO SUBSIDIES

[peste]

HP 250 G8 BIOS BLOCKED
prodid 5Z215ES#AKD SN# CND2283YGH
PS. WHERE TO SUBSIDIES

post the original contents of the bios chip..

[junior_desampa]

Good afternoon, can you remove the password?

HP 250 G8
SN BRJ2514MY5
BOARD. LA-K201P REV1.0 2020-09-18

[lapfix]

Good afternoon, can you remove the password?

HP 250 G8
SN BRJ2514MY5
BOARD. LA-K201P REV1.0 2020-09-18

Good luck

[lapfix]

HP 250 G8 LA-k201P
Serial: CND1180ZTL

please clear my bios password.
thanks everyone

Good luck

[richard_barsby]

Hi the history is the user has broken the hinges and screen but no damage visiblr to the LCD cable.
it was left for a couple of days and the battery discharged, after charging the screen backlight no longer worked.
Replaced the complete lid assy, guaranteed working backlight, stil the same problem on the EDP connector of the mobo the backlight enable line always stays low.
I assume it is BIOS error, i tried crissis recovery with ext screen and it completed ok but still the same problem.
I am asking if anyone has a good file dump or can create one with my info.
The TXT file is the current BIOS dump using a dataman programmer in bin format.
This is my 1st post so please be gentle and guide me where I have erred.
Rich

[peste]

post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..
Don't post pictures unless asked....No one wastes time enlarging pictures, turning them, or using a magnifying glass to see numbers or letters..
it makes our work easier, not yours..

read the forum rules..
https://www.badcaps.net/forum/troubl...before-posting

[peste]

Hi the history is the user has broken the hinges and screen but no damage visiblr to the LCD cable.
it was left for a couple of days and the battery discharged, after charging the screen backlight no longer worked.
Replaced the complete lid assy, guaranteed working backlight, stil the same problem on the EDP connector of the mobo the backlight enable line always stays low.
I assume it is BIOS error, i tried crissis recovery with ext screen and it completed ok but still the same problem.
I am asking if anyone has a good file dump or can create one with my info.
The TXT file is the current BIOS dump using a dataman programmer in bin format.
This is my 1st post so please be gentle and guide me where I have erred.
Rich

post S/N, full name and model, motherboard model, product number,etc....write with the keyboard..

post the contents of the bios chip even if it is corrupted..

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

[richard_barsby]

Hi Peste
Thankyou for your response, I did browse the poster hints but obviously not good enough, some forums don't like appending onto other posters questions so I wrongly started my own.
The Laptop is an
HP 250 G8
Product No 2M3A1ES#ABU
SN CND13124J2

Mobo FPI50 LA-H329P Rev 2.0

The problem is no LCD backlight enable signal from the mobo the LCD old screen has broken hinges, it did illuminate but no longer does and the only thing that as far as I know was the battery fully discharged before I got it and after recharge the screen no longer illuminated.
I replaced the whole lid assy any way just incase the cable had been damaged with a known good screen assy, this also shows a picture on the screen but no LCD back light operation and again the back light enable signal on the EDP connector on the mobo remains low.

I have attached the BIOS file from the computer I have renamed the ext to TXT as the site says I can not upload .bin files.

Please advise.

Richard

[hoaca388]

Hi Peste
Thankyou for your response, I did browse the poster hints but obviously not good enough, some forums don't like appending onto other posters questions so I wrongly started my own.
The Laptop is an
HP 250 G8
Product No 2M3A1ES#ABU
SN CND13124J2

Mobo FPI50 LA-H329P Rev 2.0

The problem is no LCD backlight enable signal from the mobo the LCD old screen has broken hinges, it did illuminate but no longer does and the only thing that as far as I know was the battery fully discharged before I got it and after recharge the screen no longer illuminated.
I replaced the whole lid assy any way just incase the cable had been damaged with a known good screen assy, this also shows a picture on the screen but no LCD back light operation and again the back light enable signal on the EDP connector on the mobo remains low.

I have attached the BIOS file from the computer I have renamed the ext to TXT as the site says I can not upload .bin files.

Please advise.

Richard

HP 250 G8 Notebook PC (2M3A1ES)

Use Winrar or 7zip before posting.

[richard_barsby]

Thank you for your Time I have donated to the forum.
Rich

[SMDFlea]

THanks for your donation, appreciated :-)