HP Elite Dragonfly G2 6050A3218601-MB-A01(A1) need BIOS unlock

[stars-n-dust]

Please help removing the BIOS password, original dumps attached.

[aldopc]

Re: HP Elite Dragonfly G2 6050A3218601-MB-A01(A1) need BIOS unlock

Please help removing the BIOS password, original dumps attached.

write U366, and keep your bin of U367.

[stars-n-dust]

Re: HP Elite Dragonfly G2 6050A3218601-MB-A01(A1) need BIOS unlock

write U366, and keep your bin of U367.

caps and num lock flashes 7 times and not powering on

[anhbanxoi]

Re: HP Elite Dragonfly G2 6050A3218601-MB-A01(A1) need BIOS unlock

caps and num lock flashes 7 times and not powering on

I think you forgot to plug in the BIOS battery.

[highping0r]

hey guys need your help. i have the same modell with a startup password. Already read U366 and ran it through RCUnlock but its still there. What can i do to get rid of it?

SN:EDACC100CUM5D0BASU

[Vesko356]

The serial number is wrong, Check again and post the correct one!

[rex98]

hey guys need your help. i have the same modell with a startup password. Already read U366 and ran it through RCUnlock but its still there. What can i do to get rid of it?

SN:EDACC100CUM5D0BASU

the ec you sent is good. the bios password is also in main you need to send here the main bios.
and serial number.

[highping0r]

the ec you sent is good. the bios password is also in main you need to send here the main bios.

There it is

[Vesko356]

Did you read my previous comment about the serial number?!

[highping0r]

Sorry but the sticker is hard to read. Here is a picture for proof. I hope that´s fine?

EDIT: Sorry but there is nothing on the outside or anywhere with the serial number
EDIT2: Got it 5CG0248HCN

[Vesko356]

This is not the laptop serial number. It's printed on the outside of the bottom cover!

[rex98]

Sorry but the sticker is hard to read. Here is a picture for proof. I hope that´s fine?

It starts with 5CG
you can also search 5CG in unicode string in EC using hex editor.
if theres no SN we could not help you.

[highping0r]

It starts with 5CG
you can also search 5CG in unicode string in EC using hex editor.
if theres no SN we could not help you.

5CG0248HCN

[Vesko356]

Read the chip with the main bios again, use verification. Posted dump is corrupted,

[highping0r]

I did verify that i read it properly 3 times. Chip looks like someone was there already. Should i just use a Clean BIOS then?

[Vesko356]

Of course not. Once the laptop is on and running, obviously the bios is fine (even with a password), you just need to read the chip properly, besides if you can't read it correctly, you won't be able to program it either.

[highping0r]

Ok, first time using one of those clips. i put it on and read the chips 3 times and always same result. I guess i have to desolder like i was doing before and post the dump again.

[Vesko356]

That would be the best approach. Using such gadgets almost always means a bad result.
Also, it is necessary and very important to have a good and verified bios backup before doing any other experiments.
You should read the chip at least twice (even better three times) and compare the contents between the dumps.

[highping0r]

Yeah sucks to desolder especially in those tight ereas but it gives the best results. I always do at least 2 backups and compare them, no worries.

[highping0r]

Next try. read it 3 times and verified that they are all the same, Please check

[minhdigital]

Next try. read it 3 times and verified that they are all the same, Please check

Send to you

[highping0r]

That worked !!! Thanks a lot

[lee20242024]

Please help removing the BIOS password, original dumps attached.
sn/ 5cg0149cvx

[EthanMai]

Please help me, need to cleaning.Thanks

HP ELITE DRAGONFLY G2
MB : 6050A3218601
SN : 5CG2060RG2
PID : 3Y372UC#ABA

[ace.code]

i tried to clean this dump cause of problem with the fan always on high speed , plus me error on post
but i cant open the dump with fit

hp elite dragonfly g2
sn: 5CG1370R8X

fit error
Error 9: Failed to decompose Image.

Error 42: Failed to open with processed commands.

[peste]

merged post..

[smd2222@yahoo.com]

hi.I need a 32MB BIOS.and ec 32mg
u367-u366