hello,
i have a late dispplay with this hp .
can someone clean me region for this dump please
i have a late dispplay with this hp .
can someone clean me region for this dump please
-
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Re: clean me region HP 15-cx0065TX
late display corrected but after booting on windows it gives blue screen with message "WHEA uncorrectable area" .
what should be the problemAttached FilesComment
-
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: clean me region HP 15-cx0065TX
very big thanksComment
-
Hello guys,
could I please get some help cleaning the ME region of the attached Zbook 17 G1 bios dump (CH341a, neoprogrammer, chip-desoldered, dumped twice, identical checksum)?
Symptoms, delayed BIOS post (ca. 45 secs.) keyboard not working, touchpad not working, booting linux live, console says "Management engine not configured".
I tried following the ME firmware cleaning guide, but whatever Flash Image Tool version I try, I get the same error:
Error 10: Failed to open with processed commands.
Unable to open file: C:\Users\Elitebook... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"? -
hello everybody,
i have a problem with the bios dump that i found it here also in the forum.
the dump is working fine but with a delay 15-20 sec... to get a display after turning on the notebook.
the other problem is that im bios :
mac address (internal lan) not applicable.
can someone please clean the region and also take a look whats the problem with the mac address?
wifi is working also fine...... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70...
Comment