Hello friends, I have this laptop with a black screen, when turning on the fan turns and turns off after 15 seconds, if I remove the ram memory if there is a ram error code, but when extracting the .bin file from the original eeprom and want write a new one it shows verification error, it is not completely erased, this makes me think that the eeprom is damaged, I already changed the eeprom and wrote successfully, I used the bios dump from the following thread: https://www.badcaps.net/forum/showthread.php?t=95250 but it gives the same failure, if anyone can check my original .bin file, the laptop has a erase Service tag and model sticker, I don't know what model it is exactly. Thanks a lot.
-
-
Re: Bios dump Dell 14 VEGAS/TURIS SKL/KBL 15341-1 91N85
I already have the model, can someone clean my bios, thanks.
Dell Inspiron 14 3467
Motherboard VEGAS/TURIS SKL/KBL 15341-1 91N85 -
hello guys could you repair my bios please
VEGAS/TURIS SKL/KBL 15341-1 91N85
service tag : 65909L2
Comment
-
thank youComment
-
.
Service Tag- 908Z0F2.
Board NO- vegas/turis skl/kbl 15341-1
AMD Graphics.
Problem- No Display.
Plz Need Bios.
Old Bios Attach plz find.
MX25L12805D@SOP16_20250129_172218 Old.rarComment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
can someone clean my bios, thanks.
Vegas / Turis SKL / KBL 15341-1 91N85
Service Tag
B7ZQFT2Comment
-
Hi
I need to a tested bios file of laptop dell
board number : vegas/turis skl/kbl 15341-1 91n85
this is original file
... -
Hello my friend.
When connected to power supply consumption is 0.09 amp / power button = reach 0.150 amp...than off.
i follow the power up sequence and as i know :
After getting ALL_SYS_PWRGD, the io generate a signal adressed to VRM called VR_ON / VR_EN , this is the VRM enable signal .
If CPU core is ok the VRM chip will generate its power good signal adressed to SP/PCH , this signal is termed = VRM_Power good / VR_RDY .
With this motherboard all is ok until sequence 8a= VR_RDY.
Questions :
1 =... -
i got this Mob need help Veteran's 15341-1/91N85 no liquid damage or corrosion , bord power up but no Video PL4801 VCCGT missing ,no beep or blink code's
Flash BIOS with SMDFlea one but not the EC
(https://www.badcaps.net/forum/showth...hlight=15341-1)
POST#3 and one from
(https://www.laboneinside.com/tag/153...1n85-bios-bin/)
now the Mob shut down after 2 mins fan on full speed blink code Amber 2 white 7 power lab 0.50 drops to 0.30 Num Lock comes after 1mins DRAMRST 1.2V ALL SYS PWERGD 3.3V PLTRST ok
... -
Hi everyone, I wanted to kindly ask you for help, I have a problem with my Dell vegas/turis mlk kbl-r 17841-1 wx2rr PC, it turned off and I was no longer able to turn it back on, I'm checking the various voltages, unfortunately I found the 19 v up to the input components PU4411, PQ4401, thank you all for any advice
... -
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I...
Comment