How to convert HP 15-bw049ur LA-E841P UMA
-
-
Re: HP 15-bw049ur LA-E841P UMA Convert
Removing Graphic coil will also do the job.Comment
-
Re: HP 15-bw049ur LA-E841P UMA Convert
are there any methods without removing the GPUComment
-
Re: HP 15-bw049ur LA-E841P UMA Convert
Post #3 = remove the power rail coil (inductor) that powers the GPU.Comment
-
Re: HP 15-bw049ur LA-E841P UMA Convert
I am not sure since I am not the author of the suggested post. It is a very quick experiment to remove the inductor. Worth an attempt. Lots of flux and patience and then lift the power inductor. Do cover the nearby parts with aluminum foil or kapton tape so they do not go flying off the board.Comment
-
How to convert HP LA-E841P dis to UMA
can you tell me how to convert dis to uma of la-e841p
Comment
-
Re: HP 15-bw049ur LA-E841P UMA Convert
Have you acted on post#3?Comment
-
Re: HP 15-bw049ur LA-E841P UMA Convert
Get image for motherboard with graphics and non graphics and try comparing them. I beleive schematic is not available.Comment
-
I have tried removing the coil from the GPU phase but when doing this the machine does not boot and puts the fan to maximum.
I assume that in new models/revisions the GPU is hardcoded in the BIOS for boot.
The original problem is that it does not boot with Windows 10 (Artifacts when loading the OS) but it does boot fine with 7/8
Comment
-
Your problem does not seem to be hardware related, i.e. it's not a mal-functioning GPU, but you have an out-dated BIOS version without support for Windows 10. I have experienced the problem with artefacts you describe with this particular board multiple times, both for UMA and DIS. The HP BIOS update descriptions list explicitly that updates are required to support Windows 10. Try to resolder your coil and update the BIOS, and it should work fine.
āComment
-
Hi all!
HISENSE 65E7KQ PRO
RSAG7.820.13512 - chassis
MT9618BAATAB - cpu
RSAG7.820.12059 - power
HD650Y3U77 - panel
KLM8G1GETF - emmc
The TV does not turn on, the standby indicator is on. All voltages are present.
Emms is dead. Not readable, not detected.
Replaced emmc.
But with another dump there is no launch
Terminal log
UART
<
AC_ON
RPMB key is not yet programmed
HASH1_VERSION=0x00000000 64bit
E-B
FDE enabled
layout pattern onebin by SAR7,0... -
This specification for the HP ENVY x360 ENVY x360 Convert 15-ds0502saBundle 6TD07EA Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the ENVY x360 Convert 15-ds0502saBundle 6TD07EA boardview and ENVY x360 Convert 15-ds0502saBundle 6TD07EA schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant...09-06-2024, 11:17 AM
-
Hi everyone,
Iām looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).
š§© Problem Summary:- The TV keeps scrolling through the menu or selecting items by itself.
- I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
- The remote control is not in use (batteries removed), and the TV still shows the same behavior.
- I
07-28-2025, 08:34 AM -
dag3bembcd0 rev d Board view and Schematic needed for Non Graphic Conversion (DIS to UMA) as the Graphic chip is bad -
hi guys i have a ho envy 14 motherboard with graphic card, code number is HP ENVY 14 6050A2316601-MB-A04, does anyone can help me to convert to intel only please thanks.
Comment