Announcement

Collapse
No announcement yet.

Dell e5420 power on then off

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Dell e5420 power on then off

    Dell e5420
    (KRUG 14" UMA Rev. A02 10ELT16G001-A, of FOXCONN) no exact schematic could be found

    Power on, then off after a few seconds (even without ram and processor same situation)
    Takes till 1.40A on dc supply

    Core ok
    Pltrst ok
    DRAMRST ok


    Any guidance please

    #2
    Re: Dell e5420 power on then off

    Look for corrosion under microscope. Bios flashed??

    Comment


      #3
      Re: Dell e5420 power on then off

      Originally posted by mcplslg123 View Post
      Look for corrosion under microscope. Bios flashed??
      ok sir, bios has not flashed as i don't have it, will do a request in the bios section.

      Comment


        #4
        Re: Dell e5420 power on then off

        Sir a bios was flashed, but takes dc supply only 0.14A,
        No core now
        Even again reflashed from backup bios, but still same. What could be its science.
        Some dust was cleaned also, no noticeable corrusion was found.

        Comment


          #5
          Re: Dell e5420 power on then off

          1.8V rail is present??

          Comment


            #6
            Re: Dell e5420 power on then off

            Originally posted by mcplslg123 View Post
            1.8V rail is present??
            Yes sir a small coil showing one side about 2.97v and other side 1.79v, when powered on

            Comment

            Working...
            X