MSI MS16J11 - no 3.3/5V

ktmmotocross

Boardkiller

Join Date: Feb 2014

Posts: 3627

Country: slovakia
#1

MSI MS16J11 - no 3.3/5V

06-19-2022, 09:56 AM

Hello.
HAve this MSI MS16J11 that have no 3.3V/5V. i found that SUS_ON signal was shorted by IC PU10. so i replace ic, now have SUS_ON - 3.3V, but absolute no reaction on 3VSUS and 5VSUS. I have REG3/5 ok, i have win, i check all mosfets. all looks good but this crap still wont release SUS voltages.

any hint?
Attached Files

MS-16J11-0A.pdf (2.85 MB, 17 views)

MS-16J11-0B.pdf (2.72 MB, 8 views)
Tags: None
mcplslg123

Badcaps Legend

Join Date: Jun 2015

Posts: 7262

Country: india
#2

06-19-2022, 10:54 PM

Re: MSI MS16J11 - no 3.3/5V

Post PU10 Voltage on all pins??
Comment

Previous template Next

HP - CE Series - DAG7ALMB8C0 REV.C - MODEL - G7AL-2G - Missing MAINON & SUSON - Turns on power LED & Charges

by reessi

Hello,

I have re-soldered the loose pins on the RAM slot which is a common fault on these models..

It charges and turns on the power LED but is missing several voltages like RAM and CPU do not come up which I believe is due to MAINON & SUSON being missing to turn these supplies on..

What I am un-sure of is what is the ITC chip waiting for to send out these signals, what are the requirements?
I have checked these lines in diode mode and they seam normal -> 600.

I have checked to see if they come on for even a fraction of a second...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
07-15-2025, 09:14 AM
ASUS X1403ZA R2.2 shorted +3VSUS

by kalilinux25

ASUS X1403ZA R2.2 shorted +3VSUS

Ive isulated everthing and 2 thing is getting hot the pcb board and the cpu mildly

+3VSUS resistance to gnd is 1.6ohms

also i remove the PL8601 to isulate the low resistance side from the +1.2V Im getting 148 ohms resistance

hope someone can help me how to determine and find the issue oif this low resistance
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
04-09-2025, 09:18 AM
Asus gl504gm 3.3v with 7v

by martin83

Good afternoon everybody.
I would like to ask for help identifying a problem that I will describe below.
Asus gl504gm laptop
Won't power on
When connecting a power supply to the input, it does not turn on and consumes 5mAh, but if you connect the battery, the battery voltage is present and when you press the power button, it starts without an image with:
pch- 1v
3.3vsus - 7v
5vsus - 5v

tps51285a is new
pch was changed
3.3 mosfets replaced
1.2 controller replaced as well as the respective mosfet.
No power supply has...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
01-07-2025, 11:49 AM
MSI GV72 MS-16j91, dead, no SUS_ON

by t34v2

MB: MSI MS-16J91 ver 1.0
CPU: i7-7700HQ SR32Q
PCH: SR30W
GPU: nVidia N17P-G0-A1
KBC: ENE KB9028Q C

No response to the power button (3.3V present on the button).
After pressing the button, the +3VSUS/+5VSUS converters should appear, but this does not happen.
KBC does not issue the SUS_ON signal (PU4 pin6 and pin20 = 0V).
+3VALW and +5VALW present.
Choke11 (+3VSUS) = 0V, 4kΩ
Choke10 (+5VSUS) = 0v, 11kΩ
I inserted another KBC programmed for this board - the same result.

I have placed KBC chip to another board...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
03-18-2024, 05:49 AM
Can someone please help me identify this ic PU10, MSI A5M

by hoangduy791989

code ic AEAN

MSI A5M Ryzen 7 code main 155L1 Rev 2.0

Thank all

3 Photos
- Channel: General Electronics Technical Discussion
07-30-2025, 02:42 AM
Loading...
No more items.

MSI MS16J11 - no 3.3/5V

MSI MS16J11 - no 3.3/5V

Comment

Related Topics