Customer claims it turned off while using it, and couldn't get it on anymore.
The board had a drop of liquid damage on R8141, replaced it and it's measuring good on both sides. Trace seems to be fine as well, the power gets to the U7501. Replaced U7501 as well, but still no boot. When connecting the charger the light goes green => amber as it should. Using the logi.wiki boot chart I see I'm missing PM_SLP_S5_L, it is at 0V. It's my first time coming across this issue, and I'm kinda stuck on what's the next step.
Thanx in advance!
The board had a drop of liquid damage on R8141, replaced it and it's measuring good on both sides. Trace seems to be fine as well, the power gets to the U7501. Replaced U7501 as well, but still no boot. When connecting the charger the light goes green => amber as it should. Using the logi.wiki boot chart I see I'm missing PM_SLP_S5_L, it is at 0V. It's my first time coming across this issue, and I'm kinda stuck on what's the next step.
Thanx in advance!
Comment