Announcement

Collapse
No announcement yet.

Need help with 820-00165

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #41
    Re: Need help with 820-00165

    Would you have a 1uf capacitor from a donor board ? Other cap values may also be ok but 1uf appears to be proven to work.

    By applying as shown by @smzlwan223, you will be creating a RC circuit that will trigger off the PP3V3_SUS line.

    Comment


      #42
      Re: Need help with 820-00165

      I have, I report the results.

      Comment


        #43
        Re: Need help with 820-00165

        I did as @smzlwan223 said, but the problem remained the same.

        Comment


          #44
          Re: Need help with 820-00165

          Can you post a clear and zoomed picture of your modification ?

          Comment


            #45
            Re: Need help with 820-00165

            This is the best I can for now.
            Attached Files

            Comment


              #46
              Re: Need help with 820-00165

              Turning it on in safe mode most normally wakes up from sleep mode, does that mean anything?

              Comment


                #47
                Re: Need help with 820-00165

                Looking at the picture you sent, I feel that your capacitor seems to be changed to the wrong capacity, remember must be changed into 1UF, so that can play the RT delay circuit.

                Comment


                  #48
                  Re: Need help with 820-00165

                  Or You could try replacing the U8130 IC.

                  Comment


                    #49
                    Re: Need help with 820-00165

                    Ok I report the results.

                    Comment


                      #50
                      Re: Need help with 820-00165

                      Replacing U8130 but the problem remained the same.

                      Comment


                        #51
                        Re: Need help with 820-00165

                        Solved, replaced U6400 and now it works fine, thank you all for your help especially @smzlwan223.

                        Comment


                          #52
                          Re: Need help with 820-00165

                          replaced U6400 and now it works fine,
                          There is no U6400 on this logic board.

                          Comment


                            #53
                            Re: Need help with 820-00165

                            My mistake U6100.

                            Comment


                              #54
                              Re: Need help with 820-00165

                              Originally posted by goksi75 View Post
                              Solved, replaced U6400 and now it works fine, thank you all for your help especially @smzlwan223.
                              You're too kind! Yesterday through Wechat and Goksi75, after the video to see the fault, it is very easy to find the problem, before the fault description, the maintenance of the problem caused by the wrong direction, in fact, the fault is caused by the internal program Error U6100 Rom. You can use a programmer to brush the factory BIOS ROM file.

                              Comment

                              Working...
                              X