iPad 2019 not charging

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • kammy6000
    Member
    • Oct 2012
    • 22
    • uk
    #21
    Re: iPad 2019 not charging

    just wanted to add here that after , replacing tristar and flex if you have a bootloop! from apple logo or blankscreen but its pulling 2.2 or 2.0 and charging , You NEED to connect homebutton /fp sensor also this can cause this blank screen also you wont get usb connection till its unlocked either , i hope i helped

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • GeirAndersen
        iPad .pcb file collection
        by GeirAndersen
        I tried searching the forum for whether this has been uploaded already, but couldn't find them (as a collection).
        Here's a dump of a bunch of iPads, I've split into 2 archives to get under file limit

        IPAD COLLECTION 1
        +---iPad mini1 820-3400(A1432) 820-3243(A1454?A1455)
        +---iPad mini2 820-3683(A1489) 820-3684(A1490?A1491)
        +---iPad mini3 820-00008(A1599) 820-00002(A1600)
        +---iPad mini4 820-00180(A1538) 820-00177(A1550)
        +---iPad mini5 820-01591(A2133) 820-01495(A2124?A2125?A2126)
        +---iPad Pro 12.9-4-820-01797(A2229) 820-01798(A2069?A2232?A2233)...
        12-09-2024, 09:28 AM
      • badboyzzz
        A2229 ipad pro 12.9 4gen strange problem Logic Board related charging but no usb data
        by badboyzzz
        I have a strange problem with my iPad Pro 12.9 4Gen / A2229. When I start the device, it stays on the Apple logo, but when I heat the back of the device with a hair dryer, the device boots, but this time there is an interesting problem. The iPad is charging, but there is no USB data on the computer. The USB charging port has been changed and the chips seem normal, but I have given it to 2 different Apple services in Latvia, but the repair could not be done. Is there anyone who can help with this? Can someone support the repair by sending only the motherboard within Europe? Thank you.
        12-28-2024, 02:11 PM
      • waterchill
        Apple iPad Pro 12,9" 4Gen no charging, but working fine
        by waterchill
        Hey folks, I have this iPad Pro 12,9" 4Gen A2232 here with no charging issue. The main fault was a crossed pins / faulty USB charging port due a bad cable.

        So I started to replace this parts:

        - replaced usb-c port -> no result
        - replaced battery -> no result
        - replaced usb-c chip CD3217B12A -> no result
        - replaced 343S00326 -> no result
        - replaced 343S00327 -> no result
        - replaced 343S00328 -> no result

        I have no more ideas for this issue. There is no short on the whole board, and the iPad is working fine...
        04-30-2024, 05:37 AM
      • Thomasraud
        Dell Vostro 3550 (v A01 with BQ24707) Plugged in, Not Charging
        by Thomasraud
        Hello,


        i have similar problem as https://www.badcaps.net/forum/showthread.php?t=37828
        QUOTED
        -It works on charger (without battery connected-only charger)
        -It works on battery (without charger connected-only battery)
        -& it also works when plugged in battery & charger, but it's not charging the battery
        //Confirming, i have same issue, but problem started from charger, centre PIN is outputing 10V+ and jumping randomly 19V


        and..


        QUOTE
        The IC cannot maintain the input current level        ...
        06-28-2022, 06:47 PM
      • waterchill
        iPad Air 3 no charging
        by waterchill
        Hi I got this iPad Air 3 Wifi only here which was dead from one day to other. I found out that U8500 had a short. Replaced U8500 and after that the iPad worked for about 5 seconds and dead again (current was 600mA without battery). Then I found a short on VDD_Main. Found that C81D7 cap was shortet. Replaced the cap short gone. Now the iPad can boot up with battery but no charging at all. If plug in charger says 0,000A but on the display it says that it is charging. When plug in the board without battery, current is looping between 80mA and 0mA like about 3 seconds 80mA then 3 seconds 0mA and so...
        04-20-2023, 03:45 AM
      • Loading...
      • No more items.
      Working...