HP15 CS3006TX ITE5570E-128 Programming

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mcplslg123
    Badcaps Legend
    • Jun 2015
    • 7262
    • india
    #1

    HP15 CS3006TX ITE5570E-128 Programming

    I need pinout for kbc programming(Schematic not avlbl). MB PART NUMBER is DAG7BLMB8DO REV D
    I tried with schematic of clevo(linked by @smdflea in another thread) and manual tracing on this mb between sio and kbd connector pins and think this should work but still not sure.

    KSO0-26
    KSO1-22
    KSO2-20
    KSO3-15
    KSO4-19
    KSO5-23
    KSO6-16
    KSO7-18
    KSO9-29
    KSI0-21
    KSI1-32
    KSI2-25
    KSI3-24
    KSI4-28
    KSI5-27

    I've ordered the sio and it will reach me within next 2-3 days.

    Can anybody confirm the pinout mentioned here is correct or post the correct pinout for kbc programming??
    Tags: None
    • mcplslg123
      Badcaps Legend
      • Jun 2015
      • 7262
      • india
      #2
      Re: HP15 CS3006TX ITE5570E-128 Programming

      Has anybody programmed this sio successfully in badcaps community??
      Any ideas guys??

        Comment

        • khaahk
          Badcaps Veteran
          • Dec 2013
          • 756
          • Estonia
          #3
          Re: HP15 CS3006TX ITE5570E-128 Programming

          No personal experience with that board but seems correct:
          PD0=26 PD1=22 PD2=20 PD3=15 PD4=19 PD5=23 PD6=16 PD7=18 BUSY=29 STB=21 AFD=32 INIT=25 SLIN=24 KSI4=28 KSI5=27

            Comment

            • mcplslg123
              Badcaps Legend
              • Jun 2015
              • 7262
              • india
              #4
              Re: HP15 CS3006TX ITE5570E-128 Programming

              Thanks@khaahk for confirmation. Will update the forum once i get the new sio.

                Comment

                • mcplslg123
                  Badcaps Legend
                  • Jun 2015
                  • 7262
                  • india
                  #5
                  Re: HP15 CS3006TX ITE5570E-128 Programming

                  Well another shorted SOC-so all effort in vain.

                  There was short on 3V coil-removed PWM-no short on coil but 3V LDO shorted. Injected 3V on LDO pin, KBC gets hot-removed kbc-short on 3V LDO gone but resistance still low and you know the rest of the story.

                  Thats the fate of most 9th/10th gen boards. Faced same issue on atleast 10 boards this month only.

                    Comment

                    • usyusy
                      Senior Member
                      • Sep 2021
                      • 171
                      • Pakistan
                      #6
                      Re: HP15 CS3006TX ITE5570E-128 Programming

                      Originally posted by mcplslg123
                      Well another shorted SOC-so all effort in vain.

                      There was short on 3V coil-removed PWM-no short on coil but 3V LDO shorted. Injected 3V on LDO pin, KBC gets hot-removed kbc-short on 3V LDO gone but resistance still low and you know the rest of the story.

                      Thats the fate of most 9th/10th gen boards. Faced same issue on atleast 10 boards this month only.
                      sir if SOC short of such these latest boards, is this soc not available in the market as other ICs are easily available or purchased/online ordered etc?

                        Comment

                        • mcplslg123
                          Badcaps Legend
                          • Jun 2015
                          • 7262
                          • india
                          #7
                          Re: HP15 CS3006TX ITE5570E-128 Programming

                          Atleast i dont know any trusted source for SOC. They are expensive to buy. 9th gen onwards SOC are very big in size and require high end bga rework station to solder them properly.

                            Comment

                            • ABHILASH007
                              New Member
                              • Dec 2022
                              • 1
                              • India
                              #8
                              IT5570E-128 SIO Programmable?

                                Comment

                                • mcplslg123
                                  Badcaps Legend
                                  • Jun 2015
                                  • 7262
                                  • india
                                  #9
                                  yes.Its programmable.

                                    Comment

                                    Previous template Next

                                    Related Topics

                                    Collapse
                                    • pickledegg
                                      Dell Inspiron 7501 / Vostro 7500 (2020) - eDP connector pinout/panel compatibility question
                                      by pickledegg
                                      Hello. I have an Inspiron 7501 here, it's the same as a Vostro 7500 in some markets (no clue). I was looking to replace the LCD, the panels included with these models are terrible.

                                      I have the schematic and it is a 4 lane eDP port on the board but the pinout seems quite weird, my question is if anyone recognises this weird pinout and knows of any other Dell models that may use it or even any compatible panel models. I have the 40-40pin cable that was used for the models with touch but do not need touch capability, was just looking for a better quality screen and higher refresh to actually...
                                      10-02-2024, 04:54 PM
                                    • araxnido
                                      Programming KBC IT8987VG ASUS TUF FX506L RT809F+PEB
                                      by araxnido
                                      Dear friends, I want to share my experience repairing an ASUS TUF FX506L gaming laptop motherboard: DABKXDMB8E0_F_BKXD. Boardview and schematic are available, as well as the BIOS and ITE ROM.

                                      When the customer brought in this laptop, it was initially dead; it showed no signs of booting for any reason. After hours of measurements, checking each stage, MOSFET, and seeing if there was a short circuit in any capacitor, I discovered a strange 0.7V leakage voltage on the 3V_S5 rail, particularly on the PL9 coil, with the board not powered on. There were 3V_LDO and 5V_LDO voltages, which...
                                      06-10-2025, 09:26 PM
                                    • maleksa
                                      Korg Kross2 Service Manual and LCD pinout
                                      by maleksa
                                      The LCD on my Korg KROSS2 keyboard is cracked and needs to be replaced.

                                      However, the cost of a replacement LCD is almost the same as the price of a second hand Korg KROSS!

                                      Does anyone have a copy of Korg KROSS2 Service Manual? I want to see the PINOUT for the LCD connection. Perhaps I can find a compatible LCD screen and not have to spend a fortune on an original replacement LCD.

                                      From what I can gather, the LCD screen is a COG with serial interface (SPI). Is there any way I can ascertain (perhaps with the use of a multimeter or oscilloscope) the PINOUT by...
                                      10-11-2024, 05:54 AM
                                    • SMDFlea
                                      Common SPI bios chip programming Questions and Answers
                                      by SMDFlea
                                      Common SPI bios chip programming Questions and Answers
                                      ----------------------------------------------------------

                                      Q: I have a bios request,i can`t post my backup as i can`t read from the chip.

                                      A: If you can`t read from it how do you expect to write to it ?.

                                      Q: Why is my bios chip unreadable ?.

                                      A: The programmer is faulty or has a worn or broken zif socket.

                                      The USB cable is frayed,connector pins worn or some other physical damage.

                                      Not enough amperage or voltage to power the programmer properly.

                                      Bad...
                                      09-02-2021, 04:40 PM
                                    • hikesync
                                      XMCQH128A​ Programming issue
                                      by hikesync
                                      Sup guys i've been having a trouble with XMCQH128A chips, this is the only model that always fails to programming. All the others models and brands like Winbond, cFeon, etc. All works fine. But i just cant do it with XMC chips, is there some specific program that i must use? (i am using NeoProgrammer)


                                      ...
                                      06-26-2025, 11:22 AM
                                    • Loading...
                                    • No more items.
                                    Working...