Works screen 15"A1707 on motherboard 13"A1706

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Beeldbuisje
    Senior Member
    • Jul 2020
    • 57
    • Belgium
    #1

    Works screen 15"A1707 on motherboard 13"A1706

    I have a Macbook pro A1706 with 820-00923 board. No Apple logo, nothing else.
    Every power source is present, laptop has fallen down from a table, no visible damage.

    Starts with 20V 830mA, after 10 seconds it becomes +/- 590mA steady. CPU gets hot after a while, fans starts to spin. You can switch it on/off by holding touch id/power button.
    Probably bad contacts on CPU so Reballing adviced?

    To exclude a bad screen, is it possible to connect this mainboard on a screen of a A1707 with 820-00928 board?

    Thanks
    Gert
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Archimedes
      HP Envy 17-3290NR 3D Blank Screen - motherboard Louis V1.1 6050A2489901
      by Archimedes
      Subject is a blank screen issue in HP Envy 17-3290NR 3D version laptop with motherboard Louis V1.1 6050A2489901 MB-A02. Production year is 2012. This one is a 2nd hand motherboard which I could use it for few months only. Suddenly no output from the internal display and also no signal from HDMI port then Windows out of order after few boots.

      Caps lock working normally and no HP's caps-lock warning blinks. Making a hard reset and replacing the RAM sticks or using different slots didn't help.

      Fans are spinning. Blindly could install windows11 and got the device manager...
      07-30-2024, 05:14 PM
    • Yehuda170
      ThinkPad P15s Gen 1, NM-C931 REV 1.0 touch screen replaced only works in UEFI menu
      by Yehuda170
      original screen was BOE NV156FHM-T07 with On-Cell Touch screen I²C

      replaced with what was in my stock, which is IVO R156NWF7 R2 which is also with On-Cell Touch screen I²C

      now touch screen works perfectly in UEFI BIOS menu & boot menu. but not working in OS, tried windows & linux too

      with original broken screen i can see in device manager touch screen in human interfaces

      but with the new screen it's not showing in device manager

      is it lenovo blocking it? is it driver missing?

      I²C is a headache
      07-14-2023, 01:29 AM
    • smic717394
      iphone XS turns off when press on screen.
      by smic717394
      Hi,

      I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
      07-25-2024, 10:16 AM
    • Ado02
      MacBook Pro A2159 - No Display / Works on External Screen
      by Ado02
      Hi,

      I am working on a MacBook that came in for a screen replacement. The MacBook powers on and works on the external screen. However, the screen stays black. The replacement screen made no difference. On further investigation, I found small amounts of corrosion.

      Please see the attached image.

      I ordered a refurbished logicboard, but the problem didn't go away with the old or replacement screen.

      Can anyone suggest where to go from here?...
      01-12-2023, 03:35 AM
    • Ryan.man
      Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
      by Ryan.man
      Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

      My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

      This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
      02-04-2025, 12:23 PM
    • Loading...
    • No more items.
    Working...