Needed bios dump too, now power on but return LED error code "A possible processor failure has occurred."
Perhaps a voltage is missing from what i solder OR cpu is indeed fried?
U86 is an AND gate. KBC/SIO is U38 (MEC5075), it is programmable but I don't think its an issue. You'd need SVOD programmer for that. Chip also has 2 rows of pin, 1 visible on the side and another under the chip.
Try a known good BIOS and post your voltage measurements.
Fixed.
I replaced U1, i flashed the bios SMDFlea suggested and worked.
Never before seen a "A possible processor failure has occurred." LED error blink due to bad bios and/or bios chip.
Well i assume i learn as i live.
Thank you both!
Back to 7510 problem now that hunts me in my sleep.
Comment