weird usb port issue with my mouse

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • paparazzo79
    Badcaps Veteran
    • Dec 2018
    • 298
    • Bosnia

    #1

    weird usb port issue with my mouse

    Hi guys.

    My mouse started to act strange recently(MX Master 3).
    Sometimes it just freezes and the only way to make it work again is to touch usb reciver (lift it up).
    I notice it happens when I don't work on PC,for like 5 min or so, like laptop goes in some sort of standby mode.
    Now I'm not sure if the laptop has an issue or mouse.
    I can plug in other wireless mouse and report back.
    Laptop is quite old,it happened on Windows 10 and I reformat because of that and now happens on Windows 7 too.
    It's so frustrating.
    I'm the owner of this mouse for like 1.5 year and never had such an issue.
    What do you guys suggest me to do?

Related Topics

Collapse

  • D3D_Tray
    Dell Latitude 5320 USB-C port issue
    by D3D_Tray
    Hey guys,

    so my half-year out of warranty Dell Latitiude 5320 (19817-1 SOUTH PEAK 13 10L) w/ i5-1145G7 and 16GB just started to act weirdly...

    The first/upper USB-C/TB port suddenly didn't accepted the charger every time and sometimes only a different one... or with a different cable but so far, the self-diagnostics didn't noticed anything so I suspected a dirty port.

    Today however... it stopped completely to accept a charger, the second/bottom one however does and after a half an hour, I notice something getting hot under there... blazing hot!
    ...
    04-24-2025, 10:27 AM
  • ugamazing
    820-02020 Super Weird Issue: Keyboard Input Character Map "Wrong"?
    by ugamazing
    So, I have a really bizarre issue that I'm struggling to identify the cause of. Working on an 820-02020 board with some bizarre keyboard/input-source character mapping. My suspicion is a possible damaged SPI ROM (U1970), perhaps, but I'm really not sure in this case:

    1. The issue is pretty weird, but when installing MacOS, I noticed my WiFi password did not work. I quickly realized the special characters (!@#$%^& etc) were not mapping correctly.

    2. I noticed the keyboard layout/input-source is defaulting to JAPANESE every single time I restore the board. I am not...
    04-10-2024, 08:06 AM
  • rounin
    MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
    by rounin
    Hi everyone,

    I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

    🛠 Original Issue
    The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
    Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

    I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

    ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
    04-19-2025, 01:18 AM
  • lukkihapsi
    Asus Vivobook X515JA Weird Boot Issue
    by lukkihapsi
    Asus Vivobook X515JA Laptop
    Issue :
    Upon turning laptop ON, screen lights up - stays black & about 30+ minutes later ASUS logo is shown & boots to windows, then laptop works fine.
    Tried :
    Cleaned inside for dust, applied fresh thermal paste. No Change!
    Removed keyboard, Trackpad, fingerprint sensor. No Change!
    Removed Internal SSD. No Change!
    Updated BIOS to latest version. No Change!
    Removed battery and pressing power button for 1 minute. No Change!
    Weird Part :
    Upon turning laptop ON, screen lights up - stays black,
    I...
    07-07-2025, 12:07 PM
  • Spider1211
    Weird but interesting issue with DELL 3542 (intel mb 13269-1)
    by Spider1211
    Hey guys, need help fixing a weird issue with DELL 3542 with board cedar intel mb 13269-1

    Schematic from here: https://www.badcaps.net/forum/showthread.php?t=52924

    Backstory:
    Laptop came in as completely dead. I opened it and removed the top half of the casing (as well as battery) and tried to power it again and it turns on and post. I turned it off, unplug charger, plugged back in and nothing. No boot, no nothing. I tried resetting CMOS but no dice.


    Power supply draw:
    Voltage: 19.40V
    Amp draw: 0.006 - 0.007A

    Amp draw...
    04-07-2021, 03:21 PM
  • Loading...
  • No more items.
Working...