Good Day,
Model : HP 15-p004nx
Boardcode : day11amb6e0
Issue :
When plug in, fan spins for a seconds then off,
When power on current responds up to 0.12A then back to 0A but no fan spin.
Checking the voltages, VCORE is missing checking enable signal, VRON also missing and already tried to flash bios and replace the SIO but same issue.
Another signal is also missing HWPG, i tried to look for the cause, I already tried cutting the lines coming from powergood signals of 1.05V , 1.35v ram supply and 5v supply ic but nothing change
Model : HP 15-p004nx
Boardcode : day11amb6e0
Issue :
When plug in, fan spins for a seconds then off,
When power on current responds up to 0.12A then back to 0A but no fan spin.
Checking the voltages, VCORE is missing checking enable signal, VRON also missing and already tried to flash bios and replace the SIO but same issue.
Another signal is also missing HWPG, i tried to look for the cause, I already tried cutting the lines coming from powergood signals of 1.05V , 1.35v ram supply and 5v supply ic but nothing change
Comment