HP mini 1104 with board no DA0NM3MB6E1 REV:E Not charging, not power

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dfortress
    New Member
    • Oct 2017
    • 2
    • nigeria

    #1

    HP mini 1104 with board no DA0NM3MB6E1 REV:E Not charging, not power

    Please Help.
    Hp Mini 1104 with board no DA0NM3MB6E1 REV:E Not charging not power.
    When the power adapter is connected to the unit, the led on the adapter blinks continuously.
  • Techtiger
    Badcaps Legend
    • Oct 2014
    • 1602
    • france

    #2
    Re: HP mini 1104 with board no DA0NM3MB6E1 REV:E Not charging, not power

    dissemble the laptop and find out the 19V cross up to CLR resister and check 3/5V alws is ok or not ?

    Comment

    • mcplslg123
      Badcaps Legend
      • Jun 2015
      • 7262
      • india

      #3
      Re: HP mini 1104 with board no DA0NM3MB6E1 REV:E Not charging, not power

      LED on the adapter blinks-Thats a sure sign of shorting in +19V rail.

      Comment

      Related Topics

      Collapse

      • Tynan Dill
        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
        by Tynan Dill
        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

        Upon bringing it home and plugging it up, it showed a standby light.

        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

        The screen seems to blackout and stay black, but with a flashlight I can see the display.

        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

        Assuming...
        11-22-2024, 01:46 PM
      • m1ch43lzm
        HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
        by m1ch43lzm
        Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
        Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
        05-12-2025, 08:37 PM
      • Cryogen
        Mini pc board no charging, no lights.
        by Cryogen
        Hi

        I have this mini pc board who refuses to charge and it is completely dead. No charging light would come on when plugged in.

        The battery shows 11.95v from the 11.85v nominal


        There are 4 mosfet (2 front and 2 back of the board) near the battery connector. only one gives 11.95v readings the other 3 show 0v.

        Is the one reading 11.95v shorted? Or the one showing 0v next to the 11.95v readings that it is the culprit?

        edit: the one with voltage is showing a short on gate, drain and source as well.

        Thanks
        07-15-2023, 02:29 AM
      • howardc64
        TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
        by howardc64
        All left and right refers to looking from rear of TV (or looking from front with TV upside down)
        • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
        • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
        ...
        07-24-2025, 05:17 PM
      • master3112
        Dell Inspiron 5590 Board 18778-1 no charging, charging not possible
        by master3112
        I would like to share my experience about charging issues with Dell power supplies with the tech community. I am working on a Dell Inspiron 5590, Mainboard 18778-1 with charging problems. The device can be switched on and works so far, only the message appears at startup:

        Alert! The AC power adapter wattage and Type cannot be determined. The battery may not change. The System will adjust the performace to match the power available.

        The power supply unit is not recognized in the Bios and the charging process is set to "idle". I use original Dell battery, type...
        07-29-2025, 01:55 PM
      • Loading...
      • No more items.
      Working...