Re: IC Marking Codes and Datasheets
See "IC Marking Codes and Datasheets #2" for more posts. https://www.badcaps.net/forum/showthread.php?p=1145761
All members please post comments in thread #2.
.
-
Re: IC Marking Codes and Datasheets
Please help me to find similar or same ic marked as
(BH5321LN) it was v_core ic of lenovo ideapad 110 15acl.
paste links to buy if it can be shipped to India.Leave a comment:
-
Re: List of pin compatible Laptop ICs
Please i need to know about this 2 ic
i can't found the shematicAttached FilesLeave a comment:
-
-
Re: IC Marking Codes and Datasheets
Both parts are made by silergy https://www.badcaps.net/forum/showpo...1&postcount=12Leave a comment:
-
Re: IC Marking Codes and Datasheets
anyone know what these chips are? from a HP x360 convertible 14t-dh200Attached FilesLeave a comment:
-
-
Re: IC Marking Codes and Datasheets
Many thanks guys for sharing this valuable informations!
Working hard is what successful people do, and You are great guys!Leave a comment:
-
Re: IC Marking Codes and Datasheets
Good information. Thank you very muchLeave a comment:
-
-
Re: IC Marking Codes and Datasheets
Your component is a RICHTEK RT8207LZQW PWM Controller.Leave a comment:
-
Re: IC Marking Codes and Datasheets
Can anyone help me find the real name of this component?
Samsung NP350xaa
BA41-02639A
apparently it's the buck converter of 1.2V Ram
EF 5H
L4KAttached FilesLeave a comment:
-
-
Re: IC Marking Codes and Datasheets
The marking is KP= https://cdn.badcaps-static.com/pdfs/...3a52d90189.pdf
I read on another forum that the RT8816A is a suitable replacement,but check the datasheets to be 100% sure.
.Last edited by SMDFlea; 12-31-2021, 05:42 AM.Leave a comment:
-
Re: IC Marking Codes and Datasheets
Anyone knows code for RT8820AGQW. The mb is asus X510UNR rev 3.0. Ic is completely burnt and nothing is visible. RT8820AGQW sits there as per boardview. I want the marking code for this IC.Leave a comment:
-
Re: IC Marking Codes and Datasheets
how can we thank you brother!!! it is a great job, thanks for all this information.....
Leave a comment:
-
-
Re: IC Marking Codes and Datasheets
hi, marking "C5BMA" and "C5CFD" the same ,please help me to find outAttached FilesLeave a comment:
-
-
See the first "IC Marking Codes and Datasheets" thread for more posts https://www.badcaps.net/forum/showthread.php?t=90619
__________________________________________________ __________________________________________________ ________
Click on the name next to the post # to view the single post
2.Nexperia & NXP
3.Panjit
4.NIKO-SEM & UNIKC Semi
5.GStek
6.Texas Instruments... -
Ricoh Power Management IC`s Marking Codes
The attached pdf titled "Ricoh PMIC`s Marking Codes,pdf" was made by me from the main pdf Ricoh_MARKINGS.
....06-06-2021, 12:29 PM -
Hello folks, I seem to have a lot of trouble when it comes to distinguishing markings on SMD components especially when it comes to the question of whether it is a 1 or an I. for example, I see components marked NI. It looks just like that. However, I cannot tell if that "I" might be a number one instead. Is there a rule of thumb that manufacturers use when using these characters? Attached is an example. This is just one example out of many I come across but it's a good illustration of my point. I appreciate any input.... -
im working on HP Probook 450 g5 with no power issue and found out coil beside this ic is short to ground...i remove the ic and short gone....ic code AQP,...looking on this ic marking code but not found https://www.badcaps.net/forum/troubl...and-datasheets...
-
Had someone drop off a laptop in which they were upgrading the ram but forgot to unplug the battery.
Looks like the ram RFI shield shorted a rail going to or coming from a Silergy IC which blasted a component off the board. I'm going to assume it was a cap but really have no way to know for sure since this board schematic doesn't appear to be in the wild yet.
I'm trying to identify the IC model now but it doesn't appear to match any of the Silergy codes from https://www.badcaps.net/forum/troubl...-tablets-and-m...
Leave a comment: