Re: IC Marking Codes and Datasheets
Authentic and very usefully information
Thank you
IC Marking Codes and Datasheets
Collapse
This topic is closed.
X
This is a sticky topic.
X
X
-
Re: IC Marking Codes and Datasheets
Mpgf 8690 = mp86901 cglt-z (mps)
amvg 049 = mp86901 agqt-z (mps)
alvh 325 = nb680 gd-z (mps)Leave a comment:
-
Re: IC Marking Codes and Datasheets
Are you sure? Do not confuse with MP86901-CGLT-Z. Would you provide me a clear photo of the ic or maybe draw it with paint? TY!
Edit: compare with attached pics pleaseLast edited by SMDFlea; 05-17-2021, 06:39 AM.Leave a comment:
-
Re: IC Marking Codes and Datasheets
APAH=NB679AGD
MPGF 8690=MP86901
AMVG*Dont knowLeave a comment:
-
Re: IC Marking Codes and Datasheets
Leave a comment:
-
Re: IC Marking Codes and Datasheets
Good initiative by@smdflea. All codes at one place.
I'll add further
SY8809DFC ( GN xxx) DFN-8 2X2
SYW232DFC ( HU xxx) DFN-8 2X2
SY8065ABC ( AE xxx) SOT23-6
SY8120ABC ( WB xxx) SOT23-6
.Last edited by SMDFlea; 12-10-2020, 03:26 AM.Leave a comment:
-
Re: IC Marking Codes and Datasheets
Thanks Alot!!!!!!!!!!!!!!!!!!!!!!!
Great Job!!!!!!!!!!!!!!!!!!!!!!!!!Leave a comment:
Related Topics
Collapse
-
by SMDFleaSee the first "IC Marking Codes and Datasheets" thread for more posts https://www.badcaps.net/forum/showthread.php?t=90619
__________________________________________________ __________________________________________________ ________
Click on the name next to the post # to view the single post
2.Nexperia & NXP
3.Panjit
4.NIKO-SEM & UNIKC Semi
5.GStek
6.Texas Instruments... -
by SMDFleaRicoh Power Management IC`s Marking Codes
The attached pdf titled "Ricoh PMIC`s Marking Codes,pdf" was made by me from the main pdf Ricoh_MARKINGS.
....06-06-2021, 12:29 PM -
by mitsu2kHello folks, I seem to have a lot of trouble when it comes to distinguishing markings on SMD components especially when it comes to the question of whether it is a 1 or an I. for example, I see components marked NI. It looks just like that. However, I cannot tell if that "I" might be a number one instead. Is there a rule of thumb that manufacturers use when using these characters? Attached is an example. This is just one example out of many I come across but it's a good illustration of my point. I appreciate any input....
-
by dqtechim working on HP Probook 450 g5 with no power issue and found out coil beside this ic is short to ground...i remove the ic and short gone....ic code AQP,...looking on this ic marking code but not found https://www.badcaps.net/forum/troubl...and-datasheets...
-
by abajorHad someone drop off a laptop in which they were upgrading the ram but forgot to unplug the battery.
Looks like the ram RFI shield shorted a rail going to or coming from a Silergy IC which blasted a component off the board. I'm going to assume it was a cap but really have no way to know for sure since this board schematic doesn't appear to be in the wild yet.
I'm trying to identify the IC model now but it doesn't appear to match any of the Silergy codes from https://www.badcaps.net/forum/troubl...-tablets-and-m... - Loading...
- No more items.
Leave a comment: