Equivalent for ISL88550AIRZ on JBL00 LA-3801P Rev 2.0 (A01)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • vettouch
    Senior Member
    • Sep 2020
    • 68
    • Nigeria
    #1

    Equivalent for ISL88550AIRZ on JBL00 LA-3801P Rev 2.0 (A01)

    Hi members, I have DELL_E6400 with display fault, I presumed after test with DMM. No voltage on RAM section. RAM IC has voltage, but no output voltage.

    Which other IC can be used for replacing ISL88550AIRZ? Thanks for your anticipated assistance. Vettouch
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • stingerchamp
      Ddr3/ddr4 ram section voltage requirements(working)
      by stingerchamp
      Follow this guide to verify voltage at RAM SECTION


      DDR 3 ram section voltage check list at ram slot

      DDR3 operating voltage VDD (at coil )= 1.5V PINs 75,76 ram slot

      VRef_DQ = 0.75 V at PIN 1
      VTT/Termination voltage= 0.75V PINs 203,204

      VRef_CA. = 0.75V PIN 126
      VDD SPD = 3.3V PIN 199
      SDA data = 3.3V PIN 200
      SCL clock = 3.3V PIN 202
      DRAM_RST# = 1.5V PIN 30

      ±+++++++++++++++++++++++

      DDR 3L ram section voltage check list at ram slot

      DDR3L...
      12-12-2020, 02:07 AM
    • Instafixx
      Macbook A2179 820-01958
      by Instafixx
      Hi,
      Have a Macbook A2179 with liquid damage. Customer showed it some shop which has done an ultrasonic cleaning of the board.
      The board pulls 0V but doesnt turn on. No Fan SPIN. NOT IN DFU.

      I checked the Power Sequences below and found this -


      Once a valid external power source (Charger or battery) is connected, the following rails will come online.
      PPBUS_G3H: Normal voltage is ~12.6v on the charger with the battery disconnected. Produced from the ISL9240 (U7000, which uses PPDCIN_G3H as its VIN.
      PP3v3_G3H_RTC: Normal voltage is ~3.3v. Produced...
      05-20-2023, 05:19 AM
    • rddube
      Lenovo L490 Ram voltage circuit malfunction
      by rddube
      Hello friends,

      Looking for some guidance here. The RAM voltage circuit on this motherboard keeps burning out PU301 which is a RT8231AGQW. Copy of the board with the burnt chip attached with some voltage measurements and copy of the schematics also included.

      I think I've checked almost every component in the circuit, but when I change the RT8231, the laptop starts I have 1.2V on the inductor for about 10 seconds and then the RT8231 goes south and no more voltage on the inductor. All other voltages on the laptop are good, this is the only one conking out for a reason I...
      07-15-2025, 04:41 PM
    • Fernon@Repair
      Gigabyte Z490 Gaming X Motherboard No VCORE Voltage
      by Fernon@Repair
      i have Gigabyte Z490 Gaming X Motherboard .it has a power on no display fault .. no vcore voltage and debug led stuck CPU LED .

      VCCIO voltage ok
      VCCSA Voltage OK
      VCCPLL Voltage OK
      Ram Voltage ok
      RamVTT OK
      VPP 2.5 OK

      But No Core Voltage

      and i want to this vrm ic datasheet or pinout (ISL69269)
      anyone have this ic pinout voltages?...
      06-25-2025, 07:19 AM
    • electron_jj
      Panasonic TH-L42D25A checking the PSU output voltage
      by electron_jj
      Hi Everyone, I am new to this forum. I have a Panasonic LED TV which doesnt turn on and is blinking 4 times repeatedly when I turn on the switch. The TV does not respond to the remote control so I had to turn on using the physical switch on the side of the TV. When I turn on the switch the 4 x blinking starts and repeat itself until I turn off the TV. There is a black screen. I turned off the light in the room to check the panel and I think there is no backlight as far as I can tell.

      I have been inspecting and testing the capacitors and diodes in the power supply board to try to...
      08-29-2021, 08:13 AM
    • Loading...
    • No more items.
    Working...