HP Pavillon G- Fan error (90B)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • senakahks
    Member
    • May 2020
    • 39
    • New Zealand

    #1

    HP Pavillon G- Fan error (90B)

    I trying to fix a l HP Pavillon G which gives the error message 90B fan error.

    Fan is slowly running for about 2 seconds and stop about 2 seconds. that runs as a cycle. What could be the problem.

    No much dust and connector has no problem.
  • peste
    Super Moderator
    • Dec 2016
    • 12973
    • ROMANIA

    #2
    Re: HP Pavillon G- Fan error (90B)

    Originally posted by senakahks
    I trying to fix a l HP Pavillon G which gives the error message 90B fan error.

    Fan is slowly running for about 2 seconds and stop about 2 seconds. that runs as a cycle. What could be the problem.

    No much dust and connector has no problem.
    maybe the fan is blocked..take it out, check it, grease it if possible..if you can't test the laptop with another fan ..
    Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

    >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

    Every donation made will go towards server fees and maintenance costs.

    Comment

    • ktmmotocross
      Boardkiller
      • Feb 2014
      • 3609
      • slovakia

      #3
      Re: HP Pavillon G- Fan error (90B)

      if fan is spinning and ges in cycle mostly conroller circuit is ok. maybe bad fan tacho.
      u have 3 or 4 wires fan?

      Comment

      • senakahks
        Member
        • May 2020
        • 39
        • New Zealand

        #4
        Re: HP Pavillon G- Fan error (90B)

        3 wire fan

        Comment

        Related Topics

        Collapse

        • Curtissimo
          HP EliteBook 850 G8 - Error code / Caps Lock permanently on and blinks twice every 6 seconds
          by Curtissimo
          Hi everyone.

          I have a HP Elitebook 850 G8.
          Serial: 5CG2324XM0
          ProdID 6L8D5EC#ABA
          It has a Winbond W25Q256JVEN Chip.

          I need to remove BIOS Password.

          I made a dump with an CHA341A programmer and NeoProgrammer 2.2.0.10.

          Attached my dump.

          I also used the HP Unlocker tool to create an unlocked file (I followed the guidelines)

          I also downloaded latest HP BIOS Update (SP158137) which includes 3 .bin files. I found the Number T76 in my original dump, so I used: T76_01210000.bin

          What I did:...
          08-26-2025, 04:42 AM
        • Sus256
          HISENSE 65E7KQ PRO - no boot
          by Sus256
          Hi all!

          HISENSE 65E7KQ PRO
          RSAG7.820.13512 - chassis
          MT9618BAATAB - cpu
          RSAG7.820.12059 - power
          HD650Y3U77 - panel
          KLM8G1GETF - emmc

          The TV does not turn on, the standby indicator is on. All voltages are present.
          Emms is dead. Not readable, not detected.
          Replaced emmc.
          But with another dump there is no launch

          Terminal log

          UART
          <
          AC_ON
          RPMB key is not yet programmed

          HASH1_VERSION=0x00000000 64bit
          E-B
          FDE enabled
          layout pattern onebin by SAR7,0...
          06-01-2025, 02:11 AM
        • Superbee_dad
          Sharp 80” long short flash backlight error - Help
          by Superbee_dad
          Hello Sharp TV experts
          Our Sharp LC-80LE642U displays one short one long flash error code which is a backlight error. I went into service mode and there were 8 lamp error counts recorded. I reset the count to 0 and did a reset. The last monitor error cause was 16 B00014639:12. 16 is the code for backlight error. I tried to power the tv up but went back into error mode.

          > I checked voltages on the power supply board and they all check out .. including 3.28 volts at the error pin.
          > There is power to the cpu and T-CONN and no faults found there. The cpu has a flashing...
          01-24-2025, 11:51 PM
        • modtool
          HP Victus 15-FA1025NL , board DAG3PAMB8D0 REV:D, shorted CPU DrMOS and n-mos
          by modtool
          Hi to all,
          the owner of this machine gave it to me after having opened it to take off the dust from the inside, telling me that after that it didn't start anymore.
          I found that one of the DrMOS (AOZ5016QI) on the CPUCORE was shorted between VIN and VSWH, and that one of the two n-mos connected to the power jack was shorted aswell.
          I unsoldered the two shorted components and verified that there were no other short circuits, then decided to power the mainboard, firstly with the lab power supply, then with its original HP 200w charger, but the behaviour is the same, the board starts...
          04-01-2025, 08:22 AM
        • Loading...
        • No more items.
        Working...