ITE IT8587E Data sheet needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Wild7
    New Member
    • Aug 2017
    • 5
    • USA

    #1

    ITE IT8587E Data sheet needed

    Having trouble locating a data sheet for an ITE it8587e. Found a few links here via search, but they appear to be broken now. Any help would be appreciated. TIA
  • mayss
    Member
    • Nov 2016
    • 30
    • Polska

    #2
    Re: ITE IT8587E Data sheet needed

    ITE IT8587e its programmable IC.

    Datasheet in file pdf.
    Attached Files

    Comment

    • CIB-TECH
      Member
      • Oct 2016
      • 14
      • algeria

      #3
      Re: ITE IT8587E Data sheet needed

      Thank you

      Comment

      Related Topics

      Collapse

      • howardc64
        A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
        by howardc64
        Problem

        This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
        08-04-2024, 10:36 PM
      • welcometoo
        acer nitro 5 AN515-55 no display / caps lock
        by welcometoo
        Hi brothers, please i need help diagnose acer nitro 5 no display issue.

        model: nitro 5 an515-55
        motherboard part number: GH51M LA-K862P Rev: 1A

        i received this laptop with a short in power line, it was a capacitor + a mosfet on VCORE line , the laptop turned on cpu and gpu getting warm all voltages seem ok except vcc_gt but no display/caps lock activity also no hdmi out.
        i flashed new bios also ec(ene kb9022) the same result .
        disabled discrete graphics (rtx 3060 ) by cutting its power and shifting a resisror near pch VCC_GT comes but still the same...
        07-05-2025, 11:11 AM
      • kingiii
        Possbility of data recovery, is it true?
        by kingiii
        Hello, A customer told us that there is a data recovery company that can by pass IMac pro 2020 with t2 chipset GPU to get their data back, I am wondering if that is possible. GPU is shorted and Imac wont boot at all. I informed customers that data are almost impossible to be retrived, and they are upset and think we are BS them. Of course being up in Canada, people like to believe that usa will have a better solution for it, a US data recovery company they searched on google told customer that they could get the data back without needing worry about T2 chip or Imac not working all that, I do not...
        07-02-2025, 02:29 PM
      • vbogoev
        Lenovo S6000 won't turn on. Data recovery needed.
        by vbogoev
        Hello,

        Here I have the mentioned tablet with motherboard s6000-mb-h401. The tablet won't turn on, no display, charging normally. I manage to connect to UART port and got this output when I try to start it:

        Code:
        [PWRAP] pwrap_init_preloader
        [PWRAP] pwrap_init
        [PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=0 rdata=5AA5
        [PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=1 rdata=5AA5
        [PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=2 rdata=5AA5
        [PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=3 rdata=5AA5
        [PMIC_WRAP]wrap_init pass,the return
        ...
        06-20-2023, 06:36 AM
      • flibidy
        Magnum IA.100 Amplifier Switches on, No Output, Possible Input Side fault?
        by flibidy
        I have here a Magnum IA.100 which belongs to my parents.



        The unit powers on & when the relay kicks in, you get a pop from the speakers (this might sound weird but is usual behavior for this amp). However, you get nothing coming through it from any of the inputs & no pops and crackls from any of the controls.


        Because of the sound from the speaker when the amp turns on I have assumed that the output section probably works but I could be wrong & I'm not sure how to test that side of things further.


        What Ive done........
        01-01-2025, 01:26 PM
      • Loading...
      • No more items.
      Working...