hello companions this portable A-300 has arrived without ignition, when I open it I find that q801 that in its pins 1,2 and 3 measure me 20v and in pin 4 its gate also measures me 20v which I think it should not be and in pins 5,6,7 and 8 0v so there is no voltage over there. I changed the mosfet in case it was malfunctioning but still the same
Looking over I see nothing burned, I doubt the IC U803; I have measured pin 12 VDC and the 20v enter, pin 3 and 4 and pin 24 00.6.
I think it's not working well.
I pass the scheme of the plate that is pt10g 6050a2171501 mb a03
Looking over I see nothing burned, I doubt the IC U803; I have measured pin 12 VDC and the 20v enter, pin 3 and 4 and pin 24 00.6.
I think it's not working well.
I pass the scheme of the plate that is pt10g 6050a2171501 mb a03
Comment