diegito11
Senior Member
Last Activity: 03-23-2025, 01:51 PM
Joined: 07-20-2016
Location: Arcos de la Frontera
-
EEprom TV Toshiba 43UL3B63DG
Good morning everyone, I was wondering if anyone had the firmware or eeprom for a Toshiba 43ul3b63dg TV with a Vestel 17mb230 main board, with a ves430qndb-2d-n41 panel, which I can't find anywhere. I wonder if you could have it....
-
Hola, he puesto otro archivo y ahora la CPU se está calentando de nuevo pero sin video. Creo que la clave es hacer bien el BIOS, pero ¿cuál?
SERIAL CZC6297TVB HP Elitedesk 800G2 SFF
Hi, I've put another file and now the CPU is heating up again but no video. I think the key is to do the BIOS right, but which one?
SERIAL CZC6297TVB HP Elitedesk 800G2 SFF
[SIZE=24px][COLOR=#e74c3c]in English please..[/COLOR][/SIZE]Hola, he puesto otro archivo y ahora la CPU se está calentando de nuevo pero sin video. Creo que la clave es hacer bien el BIOS, -
Hello, I have a similar problem to the other users, it turns on and I have no image, I have reprogrammed many BIOS and the result is the same or worse, since now the CPU does not heat up, can you help me?
Attachments...Leave a comment:
-
Eprom TD System TD40DLT1F
Hi, good afternoon, I'm looking for the eprom of this TV model, I can't find it anywhere.
TD System TD40DLT1F
I would appreciate any partner who has these files.... -
Re: toshiba R840 Datasheet of 39a404
lo encontre ,graciasLeave a comment:
-
Re: toshiba R840 Datasheet of 39a404
I can't find the datasheetLeave a comment:
-
Re: TV LG 32LG600 turns on when you want
Because of bios you don't think it's right?Leave a comment:
-
Re: TV LG 32LG600 turns on when you want
Could you do a little reflow and see how long I can last?
How much would this type of processor support less than 248º?Leave a comment:
-
Re: TV LG 32LG600 turns on when you want
[url]https://www.youtube.com/watch?v=0o5D9SVTDOo[/url]
could this be the problem?
apparently it is a common problem in these LG because I have already been able to verify it in several forums on the internet but they do not find the solution.Re: TV LG 32LG600 turns on when you ...n the internetLeave a comment:
-
Re: TV LG 32LG600 turns on when you want
I have checked all the power supply capacitors and they are all correct. This TV is giving me quite a few headaches.Leave a comment:
-
TV LG 32LG600 turns on when you want
It enters a loop to try to turn on where sometimes after "x" time it manages to turn on or most of the time it fails to turn on continuing with the loop. The loop is always: 1st The red button alternates with the white color, this is normal. 2º About 5 seconds with the black screen and then the screen starts to shine, this is normal. 3º The screen stays black and I immediately start with step 1 and so on, the normal thing is that after the brightness of step 2º the image appears. If I leave it unplugged for several hours, it turns on without problems, but if I turn it off and want... -
toshiba R840 Datasheet of 39a404
Hello good, I ask for your help because I can't find the datasheet of 39A404 QFN-24 of a toshiba R840, since I don't have a schematic really the board is quite messy and I'll start looking for this ic, because I think it has a short in the line of 19v.... -
scjematico o boardview toshiba tecra r840
hello, good evening, would someone have the schematic of a tecrar840-103 with a FAL4SY1 A3012 plate -
Frozen screen on Asus P8P67-M PRO motherboard
good companions, I have a rare case to tell you to see where to attack.
It turns out that I have an Asus P8P67-M PRO version 1.0 board that turns me on and gives video and I enter bios but when it comes to installing an operating system, it always hangs either in the installation or once finished, I have tried with Windows 10 and W.7, I have changed the pendrive and it continues to fail me, I have even installed a W 10 installation of a hard disk that I use on many boards to see that it works and it gives me video, just for checks and there it starts windows but After a while it crashes,... -
notebook Fujitsu lifebook AH530 Quanta FH2
I put a small problem with a laptop that turns on the cpu fan and starts windows but it stops and the fan no longer starts, my question seeing page 26 of the schematic in the CPU FAN CTRL; ek pin 3 that goes to Q11 the FANSIG signal goes to the KBC, there I have 3v at the beginning and then they sevan, and they no longer appear, it is supposed that the kbc is the culprit, right?
The equipment is a fujitsu siemens lifebook AH530 Quanta FH2 intel UMA rev 1A... -
Lenovo B50-10 only power led and nothing else
good colleagues, I have received a Lenovo B50-10 with aivp1 / aivp2 la-c771p rev 1.0 board that its symptoms are that when you turn on the power button only the led lights up, I have checked all the sources and they get voltage even it gets hot Something the processor but I have no video, making a visualization on the board I see that the audio chip gets very hot, so I see that the fault is there.
Apparently this equipment has been manipulated because it is missing the jack connector that has been desoldered, I suppose to cancel it and I do not know if that is the reason why it is hot,... -
Re: Rare problem on MSI Z77A-G41 board when powering up
hello piernov, can you guide me where to look? or research,? I am not a professional but I am little by little analyzing it and studying what I can....Leave a comment:
-
Re: Rare problem on MSI board when powering up
Actually I have no signal from slp s3 # in the super IO so the pch is dead, the same thing happens to me with another Z77 motherboard from asrock, I mean to throw the board away....Leave a comment:
-
Re: Rare problem on MSI board when powering up
I have thought about the PCH because when it turns on well with the bridge that I make, the pch tends to get too hot I think, but I wanted to ask to see if someone had happened something similar to it.Leave a comment:
-
Rare problem on MSI Z77A-G41 board when powering up
Good afternoon colleagues, I have a problem with a desktop board MSI Z77A-G41 MS-7758 ver.3.1 that I have changed the super IO because it did not start but now I have another case that I can not find out, it turns out that it turns on and I enter bios but just bridging the green wire with ground, from the switch the fan only makes a couple of turns but it does not stop.
Turning on with the bridge gives me access to bios but when I turn it off it turns on but it does not give a video signal, if I reset bios on the bridge that has the board, when I turn it on again it gives me a bios signal...
No activity results to display
Leave a comment: