Ok when I received this Mac it had no chime and mouse connected did nothing 
I looked over cpuvcore and restored it. There was work done and a few joints weren't soldered well. No I have a issue with the onboard audio and no image
I plug a mouse in and it now blinks. Im looking at the schematic and see u9000 gets power from r9094 and r9094 gets powered by q9607.
L9000 0v
R9094 0v on both 1-2
Q9607 on en I get .3 v is one of these internally shorted ?
R9676 :
pin 1 pp3v3= 3.3
pin 2 gmux_s3_pd_en =.3v
C9010 0v on both pins
All_sys_pwrgd 3.3v
I thought since the onboard speaker wasn't working it might be the 3.3 power rail
Might have a issue but everywhere I search for this rail it's good. Please if my diagnoses is off please let me know. thank you everyone
 thank you everyone
							
						
					I looked over cpuvcore and restored it. There was work done and a few joints weren't soldered well. No I have a issue with the onboard audio and no image
I plug a mouse in and it now blinks. Im looking at the schematic and see u9000 gets power from r9094 and r9094 gets powered by q9607.
L9000 0v
R9094 0v on both 1-2
Q9607 on en I get .3 v is one of these internally shorted ?
R9676 :
pin 1 pp3v3= 3.3
pin 2 gmux_s3_pd_en =.3v
C9010 0v on both pins
All_sys_pwrgd 3.3v
I thought since the onboard speaker wasn't working it might be the 3.3 power rail
Might have a issue but everywhere I search for this rail it's good. Please if my diagnoses is off please let me know.
 thank you everyone
 thank you everyone
							
						
 track pad works with clicking but no swipe keyboard works if you press same key several times WiFi not working at all any suggestions?
 track pad works with clicking but no swipe keyboard works if you press same key several times WiFi not working at all any suggestions?
							
						
Comment