lenove thinkpad t410 hidden light screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mmaewbsoft
    Senior Member
    • Apr 2018
    • 65
    • yemen
    #1

    lenove thinkpad t410 hidden light screen

    working with external desktop screen but with its screen hidden light i checked fuse f1 and f19 in mb getting 3 v and duse on screen 3v i change other screen from other t410 working but frist screen is hidding light
    please hlep me what can i do to solve screen
    Tags: None
    • mcplslg123
      Badcaps Legend
      • Jun 2015
      • 7262
      • india
      #2
      Re: lenove thinkpad t410 hidden light screen

      probably backlit ic on the screen itself is bad or components near it.

        Comment

        • raajkumar
          Badcaps Veteran
          • Mar 2015
          • 354
          • Srilanka
          #3
          Re: lenove thinkpad t410 hidden light screen

          check fuses on lcd back panel and if any fuse found blown also check caps for short circuit before you replace fuse.

            Comment

            • mmaewbsoft
              Senior Member
              • Apr 2018
              • 65
              • yemen
              #4
              Re: lenove thinkpad t410 hidden light screen

              fuses good and no components bad i want to know which ic for light screen

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Ryan.man
                  Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                  by Ryan.man
                  Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                  My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                  This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                  02-04-2025, 12:23 PM
                • Rav_tangle
                  MacBook Pro 2011 turns on with keyboard light , screen dead
                  by Rav_tangle
                  Hi all , thanks for having me & I think this has been asked before but my case seems a bit odd.
                  I have a MacBook Pro , board 820-2915a and it turns on , chimes etc etc , keyboard lights up, fans spins , can turn caps lock on/off but screen is dead.
                  Iv tried the resets , shine torch through back logo , nothing , it seems the screen has no power. If I plug charger , it charges but if I disconnect battery it displays green light but won't turn on. Iv tried screen on with another board & it works & seems I'm not getting any voltage at pin 2 , next to ground pin .
                  is this...
                  05-31-2024, 04:09 PM
                • Alicat
                  Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
                  by Alicat
                  Hello,

                  Stopped by this site trying to fix my parents Panasonic Plasma TV.

                  Model number is TH-50PZ85U

                  Power comes on and the red power light stays on solid.

                  Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

                  I also hear a few clicks.

                  I also think my parents said there was a thunderstorm and the TV failed after that.

                  Section 6 in the service manual talks about power and no screen,...
                  10-30-2024, 10:09 AM
                • reformatt
                  Macbook Air M2 A2681 Kernel panics after screen replacement
                  by reformatt
                  Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                  It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                  07-31-2025, 08:37 PM
                • smic717394
                  iphone XS turns off when press on screen.
                  by smic717394
                  Hi,

                  I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                  07-25-2024, 10:16 AM
                • Loading...
                • No more items.
                Working...