ASUS N752VX power signal missing ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jasko_jacker
    Badcaps Legend
    • Oct 2014
    • 1137
    • italy

    #1

    ASUS N752VX power signal missing ?

    Asus N752VX
    The notebook, after I replaced the pch, and seems to start up correctly but I have a doubt, staying on the bios screen I checked some voltages and the VccGT power signal (Processor Graphics)
    it is at 0 volts, I suppose it is the power supply of the video card integrated in the CPU chip. In the power sequence I see this signal as the last step and it should be enabled.
    What I did not understand?
    Attached Files
  • piernov
    Super Moderator
    • Jan 2016
    • 4435
    • France

    #2
    Re: ASUS N752VX power signal missing ?

    iGPU power rail may not be enabled when iGPU is idling or when dGPU is being used instead.
    OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

    Comment

    • jasko_jacker
      Badcaps Legend
      • Oct 2014
      • 1137
      • italy

      #3
      Re: ASUS N752VX power signal missing ?

      Originally posted by piernov
      iGPU power rail may not be enabled when iGPU is idling or when dGPU is being used instead.
      So dGPU is used by default and iGPU with operating system, but usually those repairs guide are amde by manufacture ?

      Comment

      Related Topics

      Collapse

      • GLISIT
        Asus Probook P5440UF-XB74 power issue
        by GLISIT
        Hi all,

        TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


        I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

        A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
        01-16-2025, 02:29 PM
      • ShadowAi
        ASUS TUF X570-PLUS doesn't power on: no VRM_EN signal.
        by ShadowAi
        Hello, I have an issue with the motherboard. Specifically, it doesn't power on, more precisely, the POST initialization doesn't occur.

        Let me start from the beginning, the motherboard suddenly stopped working one day. There are no beep signals from the speaker, and the debug LEDs are not lighting up. After inspecting it under a microscope and using thermal imaging, I didn't find anything that could be damaged.

        After that, I began voltage measurements, in which I noticed the absence of VDDQ, VDDP, VTT, and VPP lines. Later, I checked if there is an EN state on these lines,...
        03-15-2024, 10:46 AM
      • Tynan Dill
        Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
        by Tynan Dill
        I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

        Upon bringing it home and plugging it up, it showed a standby light.

        I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

        The screen seems to blackout and stay black, but with a flashlight I can see the display.

        With my Playstation 4 connected via HDMI, and running a game I can hear sound.

        Assuming...
        11-22-2024, 01:46 PM
      • reessi
        HP - CE Series - DAG7ALMB8C0 REV.C - MODEL - G7AL-2G - Missing MAINON & SUSON - Turns on power LED & Charges
        by reessi
        Hello,

        I have re-soldered the loose pins on the RAM slot which is a common fault on these models..

        It charges and turns on the power LED but is missing several voltages like RAM and CPU do not come up which I believe is due to MAINON & SUSON being missing to turn these supplies on..

        What I am un-sure of is what is the ITC chip waiting for to send out these signals, what are the requirements?
        I have checked these lines in diode mode and they seam normal -> 600.

        I have checked to see if they come on for even a fraction of a second...
        07-15-2025, 09:14 AM
      • PantherDave
        Microsoft Surface Pro (5th gen) model 1796 - no power
        by PantherDave
        Hi all!

        I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

        I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
        https://www.badcaps.net/forum/troubl...-hardware-devi...
        05-29-2024, 02:01 PM
      • Loading...
      • No more items.
      Working...