K1126

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • frankkrantz
    Member
    • Feb 2019
    • 12
    • uk
    #1

    K1126

    K1126ic

    Does anyone know what this component is please, i canot find a data sheet/schematic for it at all..

    I think it may be power supply to usb 5v.

    Kind Regards

    Frank Krantz
    Attached Files
    Tags: None
    • caspian
      Badcaps Legend
      • Oct 2015
      • 1589
      • Laptop
      #2
      Re: K1126

      I guess US1 is probably an AND gate and DM2 is probably an array of Diodes. you can use the datasheet of MC74VHC1G08 for US1.
      Last edited by caspian; 02-18-2019, 10:54 AM.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Lee M.
          LG 55LN5710 backlight diffuser sheet order
          by Lee M.
          Hello all, new member here. I replaced the LED strips and found that the BL can be turned on with the TCON board and LCD panel disconnected. So new LED strips are working fine. Now the problem. There are 3 diffuser sheets on this set. One sheet is thicker than the others and I know it goes in first next to the LED strips. But one side of this sheet has a rougher texture than the other side. Does the rough side go up or down? The 2 thinner sheets have tabs that will only allow them to be installed one way so that's good. One sheet is what I would call plain translucent. The other sheet is whiter...
          11-29-2021, 07:52 PM
        • lfhlaw
          60LN5600 white reflective sheet
          by lfhlaw
          So I had to replace the LED lights on this TV and that worked out nicely. But the White reflector sheet that helps to diffuse the led lights evenly was glued into the back chassis which had to be removed to replace the LEDs.

          Placing the white reflector sheet caused it to not sit evenly - causing weird diffusing when TV was all put together. Picture is still decent, but now there are dark and light spots due to the white reflector sheet not sitting against the back chassis.

          Anyone have thoughts on replacement white reflector? or do I just scavenge broken TVs for...
          05-23-2022, 07:14 PM
        • howardc64
          A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
          by howardc64
          Problem

          This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
          08-04-2024, 10:36 PM
        • Topcat
          Nihon Kohden (Tyco Electric) ET2400LM 24" Restoration
          by Topcat
          This was rescued from a recycle gaylord from a hospital along with some other things....

          I don't have to explain the significance of restoring this; 16:10 Aspect Ratio, 1920x1200; very high end Samsung LTM240CT04 panel. Add in it's blonde (will pair nice with a retro rig) and also ELO touchscreen. It is very well made, very heavy. Even used these are hard to find and expensive....but it had some problems...

          Problem one, the external PSU was missing. I found one in my stash that had the correct voltage (12V) with the goofy 4-pin plug it used. It however was light on the...
          08-02-2023, 10:07 PM
        • sam_sam_sam
          TOP201YAI 3-Terminal TO-220 PWM switch Figure #7 in date sheet
          by sam_sam_sam
          I would like to know what the specifications for the transformer in this data sheet is I would like to build one
          Also for figure number 8 as well
          Also for figure number 9 as well

          Here is the data sheet I know that this item has been disconnected but I can buy them surplus
          https://cdn.badcaps-static.com/pdfs/...da43fe7f6c.pdf

          I have a mad scientist streak in me lately and want to be a little adventurous

          The reason is I have some ATX switching power supply that I have as spare parts from and wondering if I could use one...
          10-09-2021, 06:21 AM
        • Loading...
        • No more items.
        Working...