PETRONAS-14 REV 1.4 wont power up

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kalilinux25
    Badcaps Legend
    • Mar 2018
    • 2084
    • ZAMBOANGA SIBUGAY

    #1

    PETRONAS-14 REV 1.4 wont power up

    the U25 Chip starts to heat up when the power button is pressed but no response the pin 6 VTT3_VCCP_PWROK is not present what maybe the cause of this problem is it bios problem?
    Attached Files
  • Techtiger
    Badcaps Legend
    • Oct 2014
    • 1601
    • france

    #2
    Re: PETRONAS-14 REV 1.4 wont power up

    is the Mob power up & no image ? VTT3_VCCP_PWROK U24 pin 6 comes from a pulldown Resester R435 10K 3,3V test it if not present test Q65 Drain for P3.3V
    3.3V ALW 5V ALW ?
    VREG3 VGEG present?
    U11 pin 65 RSMRST# ?
    Last edited by Techtiger; 02-07-2019, 01:49 AM.

    Comment

    • kalilinux25
      Badcaps Legend
      • Mar 2018
      • 2084
      • ZAMBOANGA SIBUGAY

      #3
      Re: PETRONAS-14 REV 1.4 wont power up

      the laptop power is presnet but wont power up

      Comment

      • kalilinux25
        Badcaps Legend
        • Mar 2018
        • 2084
        • ZAMBOANGA SIBUGAY

        #4
        Re: PETRONAS-14 REV 1.4 wont power up

        Originally posted by kalilinux25
        the laptop power is presnet but wont power up
        all is not presnet on the boar but i have power led onj

        Comment

        • Techtiger
          Badcaps Legend
          • Oct 2014
          • 1601
          • france

          #5
          Re: PETRONAS-14 REV 1.4 wont power up

          Originally posted by kalilinux25
          the U25 Chip starts to heat up when the power button is pressed but no response the pin 6 VTT3_VCCP_PWROK is not present what maybe the cause of this problem is it bios problem?
          pin 6 VTT3_VCCP_PWROK this is a Switching power only it comes in S0 state off in S3-S5
          check if you have P12.0V ALW ?
          U11 pin 65 RSMRST# ? you dident answer
          test U11 pin 8 for 3.3V
          U11 VCC1PIN 14 VCC2 PIN 49 FOR 3.3V
          Last edited by Techtiger; 02-07-2019, 02:33 AM.

          Comment

          • kalilinux25
            Badcaps Legend
            • Mar 2018
            • 2084
            • ZAMBOANGA SIBUGAY

            #6
            Re: PETRONAS-14 REV 1.4 wont power up

            I dont have p12.0v_alw i only have 3v on r459
            ULL PIN 65 NO VOLTAGE

            Comment

            • kalilinux25
              Badcaps Legend
              • Mar 2018
              • 2084
              • ZAMBOANGA SIBUGAY

              #7
              Re: PETRONAS-14 REV 1.4 wont power up

              u11 pin 8 has 2.4v
              pin 14 and 49 has 3.3v

              Comment

              • Techtiger
                Badcaps Legend
                • Oct 2014
                • 1601
                • france

                #8
                Re: PETRONAS-14 REV 1.4 wont power up

                Originally posted by kalilinux25
                u11 pin 8 has 2.4v
                pin 14 and 49 has 3.3v
                my misstake not pin 8 of U11 that's pin 65 & 64 for 3.3V, no Voltage in pin 65 Mob will not pass S3 state , 12V is missing test c1019 or R381 for 12V i cannot find the starting point of the 12V Rail may be anothe member can help IT SHOULD COME FROM PAGE 40 OF SCHEMATIC
                Last edited by Techtiger; 02-08-2019, 02:36 AM.

                Comment

                • khaahk
                  Badcaps Veteran
                  • Dec 2013
                  • 759
                  • Estonia

                  #9
                  Re: PETRONAS-14 REV 1.4 wont power up

                  U25 heats up if it has too much current drawn. Resistance to GND on VREG3 and VREG5? Same LL1 and LL2?

                  12V source is shown in page 41 down right corner. Q67 & ZD1

                  Comment

                  Related Topics

                  Collapse

                  Working...