Announcement

Collapse
No announcement yet.

Card Reader to USB wiring help please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Card Reader to USB wiring help please

    So i have this Compaq Presario C700 whose USB does not work. It has 5V and powers up the usb device but end us as unrecognized device.
    Upon checking the out of the two data signal only one has 3.3 volt and the other one no voltage at all.

    The card reader does work as it should. I was hoping if someone knows how to make a wiring so we can use the card reader data lines work with USB.

    Appreciate your help. Thanks

    #2
    Re: Card Reader to USB wiring help please

    look at the schematic

    find it by board code

    Comment


      #3
      Re: Card Reader to USB wiring help please

      Originally posted by ktmmotocross View Post
      look at the schematic

      find it by board code
      Schematic attached but I am not sure how to do this.
      Attached Files
      Last edited by IamPritesh; 01-27-2019, 01:55 PM. Reason: Fixed - Attachment

      Comment


        #4
        Re: Card Reader to USB wiring help please

        this is maintenance manual not schematic

        put board code to google

        Comment


          #5
          Re: Card Reader to USB wiring help please

          Originally posted by ktmmotocross View Post
          this is maintenance manual not schematic

          put board code to google
          Sorry about that. Uploaded the correct schematic.
          Attached Files

          Comment


            #6
            Re: Card Reader to USB wiring help please

            on page 27 find your connector and check its state

            Comment


              #7
              Re: Card Reader to USB wiring help please

              OK the Card reader does not work however the webcam, does work. Has anyone ever successfully repaired a USB using Webcam data signals ?

              Do yo just connect the data lines of webcam to data lines of usb ? I am sure there must be more to it. I dont want to ruin a working laptop with wrong wiring . Please help.

              Comment


                #8
                Re: Card Reader to USB wiring help please

                all usb have the same lines. if one of yours reader is missing, and connector is good than u have bad ICH or cracked ball under it

                Comment


                  #9
                  Re: Card Reader to USB wiring help please

                  Originally posted by ktmmotocross View Post
                  all usb have the same lines. if one of yours reader is missing, and connector is good than u have bad ICH or cracked ball under it
                  The reader and the USB is not working. All have +5V and the usb has data+ but no data- signal. I suspect it is the the ICH. However the webcam is still working fine which also gets the signal data+ and data- from the ICH. I was hoping we can have a hack that would enable the USB using these webcam signal.
                  I have heard someone on this forum do it, just dont remember who.

                  Comment


                    #10
                    Re: Card Reader to USB wiring help please

                    webcam is just another usb device. see lines at bottom of page 20

                    Comment

                    Working...
                    X