So i have this Compaq Presario C700 whose USB does not work. It has 5V and powers up the usb device but end us as unrecognized device.
Upon checking the out of the two data signal only one has 3.3 volt and the other one no voltage at all.
The card reader does work as it should. I was hoping if someone knows how to make a wiring so we can use the card reader data lines work with USB.
Appreciate your help. Thanks
Upon checking the out of the two data signal only one has 3.3 volt and the other one no voltage at all.
The card reader does work as it should. I was hoping if someone knows how to make a wiring so we can use the card reader data lines work with USB.
Appreciate your help. Thanks
Comment