Hello everyone,
I am new to this forum and this is my first message,
for info, I am Belgian so sorry for my english
I have an Elitebook 8740w. since I updated my BIOS, I have an error message at startup "SYSTEM BOARD 00A" - System configuration ID
I have the BIOS version 68CAD ver. F. 60 of 11/10/2015, my motherboard is 1520 KBC version 33.32.
So I read dozens of pages on the net, watched dozens of videos on the net but I can not do it. I spent 2 evenings and I'm losing patience trying to solve
I'm trying to run Wndmifit64.exe (notebook DMI Firmware interface tool, I'm getting the error "this system board is not supported, will not be able to set bios settings" and "MPM is not unlocked ...."
So, I am the instructions of the HP guide "DMI programming for consumer notebooks
For this to work, activate the MPM mode. So, I'm doing a bootable USB key with the Nbdmifit file.
I run the USB key in UEFI mode ... finally I receive the error "this platform is not supported" therefore impossible to activate the mode MPM.
I'm still trying to run nbdmifit.bat..I'm introducing the date and I have the message "TPM is OFF" (I think TPM = MPM).
I contacted HP support, they report that my computer is too old (2011) and that they can not give me any assistance
please help me
Can you tell me exactly what I need to do
Thank you
I am new to this forum and this is my first message,
for info, I am Belgian so sorry for my english
I have an Elitebook 8740w. since I updated my BIOS, I have an error message at startup "SYSTEM BOARD 00A" - System configuration ID
I have the BIOS version 68CAD ver. F. 60 of 11/10/2015, my motherboard is 1520 KBC version 33.32.
So I read dozens of pages on the net, watched dozens of videos on the net but I can not do it. I spent 2 evenings and I'm losing patience trying to solve
I'm trying to run Wndmifit64.exe (notebook DMI Firmware interface tool, I'm getting the error "this system board is not supported, will not be able to set bios settings" and "MPM is not unlocked ...."
So, I am the instructions of the HP guide "DMI programming for consumer notebooks
For this to work, activate the MPM mode. So, I'm doing a bootable USB key with the Nbdmifit file.
I run the USB key in UEFI mode ... finally I receive the error "this platform is not supported" therefore impossible to activate the mode MPM.
I'm still trying to run nbdmifit.bat..I'm introducing the date and I have the message "TPM is OFF" (I think TPM = MPM).
I contacted HP support, they report that my computer is too old (2011) and that they can not give me any assistance
please help me
Can you tell me exactly what I need to do
Thank you
Comment