Re: ACER TIMELINEX 5830TG no led no power alw present
ok thank you i read it, i'm beginner in mb repair and i dont know if it must be present in all power condition. I assume that it will be always present.
Is the same thing if I remove pl2 instead of pr28 (only for comodity)?
I had removed PR28 and test with PSU+BATTERY.
In attachment the result.
ADD
-PSU ONly
-BATT only
-power connector
-protection circuit
I had checked every pin of BQ2472:
-pin 7 according to datasheet "IOUT voltage is 20 timesthe differential
voltage across sense resistor"
maybe is too low?It also connected to protection circuit.
Comment