how do i open

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mitu_sharma
    Senior Member
    • Jul 2015
    • 182
    • india

    #1

    how do i open

    hi friends pls help

    i have jm50 r2.1 boardview file pls tell me how do i open these files.
    Attached Files
  • khaahk
    Badcaps Veteran
    • Dec 2013
    • 812
    • Estonia

    #2
    Re: how do i open

    http://boardviewer.net/
    or
    http://openboardview.org/
    Last edited by khaahk; 11-07-2017, 02:13 PM.

    Comment

    • petehall347
      Badcaps Legend
      • Jan 2015
      • 4440
      • United Kingdom

      #3
      Re: how do i open

      how do you open them in linux o/s ?

      Comment

      • khaahk
        Badcaps Veteran
        • Dec 2013
        • 812
        • Estonia

        #4
        Re: how do i open

        then only openboardview
        https://github.com/OpenBoardView/Ope...eases/tag/R7.3

        Comment

        • petehall347
          Badcaps Legend
          • Jan 2015
          • 4440
          • United Kingdom

          #5
          Re: how do i open

          Originally posted by khaahk
          that one doesn't look good ..oh well .


          The package is of bad quality
          The installation of a package which violates the quality standards isn't allowed. This could cause serious problems on your computer. Please contact the person or organisation who provided this package file and include the details beneath.
          Lintian check results for /home/pete/Downloads/OpenBoardView-R7.3-Linux.deb:
          E: openboardview: control-file-has-bad-permissions md5sums 0664 != 0644

          Comment

          • khaahk
            Badcaps Veteran
            • Dec 2013
            • 812
            • Estonia

            #6
            Re: how do i open

            chmod --help

            Comment

            • piernov
              Super Moderator
              • Jan 2016
              • 4439
              • France

              #7
              Re: how do i open

              @petehall347 This is in no way harmful and the "safety feature" can be disabled to install this package, although I don't know how because I don't even know where it comes from. What is the distribution you're using?

              The control file for the Debian package is generated by CPack, this is caused by an older version of CMake used on Travis.
              Furthermore, the safety check doesnt make sense, why a 664 permission on the control file be harmful is beyond me…
              Still I may come with a workaround in the future. (like using at least CMake 3.3 on Travis)
              OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

              Comment

              • petehall347
                Badcaps Legend
                • Jan 2015
                • 4440
                • United Kingdom

                #8
                Re: how do i open

                latest ubuntu .
                i trust its judgement .. well i have to as i dont know any better .
                i could have clicked install anyway but i dont understand the risks .

                Comment

                Related Topics

                Collapse

                • m1ch43lzm
                  Notice to users of XGecu TL866II Plus / T48 / T56 / T76 programmers regarding BIOS backup file size
                  by m1ch43lzm
                  Hi everyone
                  I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
                  Programmer models: XGecu TL866II Plus / T48 / T56 / T76

                  Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
                  There's also an extra OTP Secu.R...
                  09-06-2025, 05:47 PM
                • to5it0
                  Need Clean BIOS/EC Bin File for Lenovo ThinkPad Yoga 11e 2H1703-27220F Rev. A Marked as U2501 on the motherboard.
                  by to5it0
                  Need Clean BIOS/EC Bin File for Lenovo ThinkPad Yoga 11e - Stuck with 0275 Error CMS

                  Hello everyone,

                  I am attempting a repair on a Lenovo ThinkPad Yoga 11e that is currently stuck at boot with the error: "0275 error CMS" even after setup new bios battery and will not allow me to enter the BIOS/Setup.

                  This is a critical issue that I believe requires flashing the BIOS chip directly using a programmer (e.g., CH341A/RT809H), as standard software updates or resets are not possible.

                  I have opened the laptop and identified the main BIOS chip...
                  10-24-2025, 01:35 AM
                • wolfrose
                  How to open a motherboard .cad file ?
                  by wolfrose
                  I received a .cad file for my laptop but don't know how to open it.

                  Any suggestion ?​
                  05-02-2024, 10:03 PM
                • Forest79
                  Lenovo ThinkStation P520 BIOS file needed
                  by Forest79
                  Hello,

                  I got a Lenovo ThinkStation P520 (Type 30BF) from a friend, asking me for a repair. Windows 11 offered a firmware upgrade as an optional update, and it failed.
                  The emergency flash procedure from the hardware manual has also failed. So, I asked an acquaintance with better skills to flash the BIOS directly.

                  However, the chip (a Macronix MX25L25673GMI-08G) has a size of 32 MB, and the BIOS file from the Lenovo website (extracted with UEFITool) has a little more than 16 MB. Thus, the software my acquaintance used (SiberiaProg v1.45, with a CH341A Programmer)...
                  07-23-2023, 07:39 AM
                • Citymin
                  NT955XED (Samsung Galaxy Book2 Pro - 15.6) BIOS dump file Request
                  by Citymin
                  Hi all,

                  My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
                  The charging red LED lights up, but the charging screen doesn't show any indication.
                  When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
                  (I've tried removing the battery and resetting the device, but the issue persists.)

                  NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
                  PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
                  S/N : 5RNK9FFT70...
                  08-05-2025, 05:12 AM
                • Loading...
                • No more items.
                Working...