hi friends pls help
i have jm50 r2.1 boardview file pls tell me how do i open these files.
i have jm50 r2.1 boardview file pls tell me how do i open these files.
-
-
Last edited by khaahk; 11-07-2017, 02:13 PM. -
Re: how do i open
how do you open them in linux o/s ?Comment
-
Comment
-
Re: how do i open
that one doesn't look good ..oh well .
The package is of bad quality
The installation of a package which violates the quality standards isn't allowed. This could cause serious problems on your computer. Please contact the person or organisation who provided this package file and include the details beneath.
Lintian check results for /home/pete/Downloads/OpenBoardView-R7.3-Linux.deb:
E: openboardview: control-file-has-bad-permissions md5sums 0664 != 0644Comment
-
Re: how do i open
chmod --helpComment
-
Re: how do i open
@petehall347 This is in no way harmful and the "safety feature" can be disabled to install this package, although I don't know how because I don't even know where it comes from. What is the distribution you're using?
The control file for the Debian package is generated by CPack, this is caused by an older version of CMake used on Travis.
Furthermore, the safety check doesnt make sense, why a 664 permission on the control file be harmful is beyond meβ¦
Still I may come with a workaround in the future. (like using at least CMake 3.3 on Travis)OpenBoardView β https://github.com/OpenBoardView/OpenBoardViewComment
-
Re: how do i open
latest ubuntu .
i trust its judgement .. well i have to as i dont know any better .
i could have clicked install anyway but i dont understand the risks .Comment
-
I received a .cad file for my laptop but don't know how to open it.
Any suggestion ?β -
Hello,
I got a Lenovo ThinkStation P520 (Type 30BF) from a friend, asking me for a repair. Windows 11 offered a firmware upgrade as an optional update, and it failed.
The emergency flash procedure from the hardware manual has also failed. So, I asked an acquaintance with better skills to flash the BIOS directly.
However, the chip (a Macronix MX25L25673GMI-08G) has a size of 32 MB, and the BIOS file from the Lenovo website (extracted with UEFITool) has a little more than 16 MB. Thus, the software my acquaintance used (SiberiaProg v1.45, with a CH341A Programmer)... -
Dear friends, I want to share my experience repairing an ASUS TUF FX506L gaming laptop motherboard: DABKXDMB8E0_F_BKXD. Boardview and schematic are available, as well as the BIOS and ITE ROM.
When the customer brought in this laptop, it was initially dead; it showed no signs of booting for any reason. After hours of measurements, checking each stage, MOSFET, and seeing if there was a short circuit in any capacitor, I discovered a strange 0.7V leakage voltage on the 3V_S5 rail, particularly on the PL9 coil, with the board not powered on. There were 3V_LDO and 5V_LDO voltages, which... -
hi everyone
i need dump file for dell server r220
i have download Flash BIOS executable file but i dont know how to conver it to Bin file
i have check on youtube there is some programs are doing this method of creating Bin file from ExE file .
if anyone has this method please need his supporting .
all the best
EXE file is attched and Original Bin file from the Bios Chip is attached also
and dell website "https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=mrxv... -
Hello to all of you! I need help with a BIOS file.
The BIOS chip is fried on my Asus F542UN laptop, and I bought a new chip that needs programming. I have a CH341a programmer but I need a .bin BIOS file. On Asus support page the firmware has another extension, .310 and from reading on this forum I understand that that file is not complete BIOS.
So, in short I need the "complete" BIOS .bin file to flash on the new chip. Another issue is that on back of the case the label says F542UN but on the sticker on the motherboard it's X542UN.
Comment