what kind of component of this

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • raajkumar
    Badcaps Veteran
    • Mar 2015
    • 354
    • Srilanka

    #1

    what kind of component of this

    I found a component inside the lenovo G560e Laptop battery. I don't know what kind of component of this. if anyone knows please tell me.

    I attached the image of the component herewith.
    Attached Files
  • raajkumar
    Badcaps Veteran
    • Mar 2015
    • 354
    • Srilanka

    #2
    Re: what kind of component of this

    I found the name print on this component as SEFUSE D6X05A. So i googled for this but it said it is a thermal fuse. Ok but i want to know which pins are fuse or i need pin map or data for this.

    Comment

    • raajkumar
      Badcaps Veteran
      • Mar 2015
      • 354
      • Srilanka

      #3
      Re: what kind of component of this

      I found the data for this fuse is SEFUSE Type D6X Combined Thermal Fuse/Resistor. i got the pin map also from the datasheet.
      Attached Files
      Last edited by raajkumar; 05-17-2017, 09:07 PM.

      Comment

      • lu33390
        New Member
        • Mar 2013
        • 3
        • France

        #4
        Re: what kind of component of this

        Hello , thank for the .pdf , I have the same problem on my battery and now I understand why it do'nt work ( but she shell is out !!!)

        Comment

        Related Topics

        Collapse

        • magneh
          Is this some kind of fuse resistor ?
          by magneh
          Hello guys

          Taking a look at some KNX domotic modules that were toasted due to some kind of electrical failure, I found out 2 weird looking resistors.

          Seem to me like some kind of fuse resistor?
          After diggin a bit seems like a fuse wirewound resistor wafer or whatever that is

          They are very toasted but I think the 5 band colours are RED GOLD BLACK ORANGE ORANGE or the opposite, not sure which is the first band.
          The red band is larger than the 4 others, but I dont have much experience with these components.

          Also one of the orange...
          02-10-2025, 07:54 AM
        • corrize
          A funny fuse story – Lumix LX100 II
          by corrize
          Hello, I disassembled this dead camera, and found this WTF… Two fuses soldered one above the other !
          I was pretty sure nobody touched it before, but that can't be from factory. There is flux, and capacitor is probably missing.
          The other weird thing : the fuses are « G » fuse : (0.75A – 8V), seems very low. The original fuse should be « O » : (32V 2,5A).
          There is « O » mark beside. All fuses have the same mark letter on main board. So, I can deduce it's a « O » fuse.
          And this correspond to the issus I saw : when I plug the battery, I measure the voltage dropping...
          10-19-2023, 09:58 AM
        • jesterace
          Samsung UE46ES8000 Blown fuse but no other signs of short
          by jesterace
          Hi I wonder if anyone might be able to steer me in the right direction. I have this Samsung UE46ES8000 TV and it went bang during use. The main fuse on the PSU board is open. I've checked every diode/mosfet/transistor I can see and nothing appears to be short to cause the fuse to go. The DC output of the bridge rectifier is not short either. I've seen online that some of these models are known for having their PFC mosfet or other mosfets shorting and blowing the fuse but i'm not seeing that here. If anyone aware of these models having any issues to cause this? I'm reluctant to just replace the...
          09-11-2024, 03:14 PM
        • jshhh
          Help replacing fuse on my Mimaki CJV300-160 vinyl printer
          by jshhh
          Hi guys,

          I'm inexperienced with electronics repairs, I've done a little bit of soldering caps and whatnot, but i have a blown fuse on this mimaki printer I got which I have bought a replacement for.

          How do I remove this type of fuse (see picture)...it kinda looks like it would pull out of that bracket but it didn't come at first pull and I didn't want to brute force it incase it's soldered on there like most of the rest of the components.

          Anybody know how to remove this type of fuse?

          (The fuse is toward the bottom of the image labeled F2)...
          06-17-2025, 01:35 AM
        • Babbar
          Argon SA1 audio amplifier power-supply - fuse blown after fixing the short?
          by Babbar
          I found a project in the electronics trash yesterday. A nice Argon SA1 audio amp with some electrical issue. Took it apart and saw that the 4A250V fuse was blown so started lifting components to find the short. Eventually got to two MOSFETs (model FTA14N50C) that are shorted and when i took them out the short was gone.

          Now i didn't have any replacements of the same model of course but i found a couple with pretty similar spec i thought (K10A60D & K12A50D) and put them in. Also replaced the blown fuse with a 3.5A250V one. Checked another time for short circuit and plugged it in....
          04-12-2024, 01:12 AM
        • Loading...
        • No more items.
        Working...