EZP2010 and minipro TL866A problem erasing MX chip

[gcomputers]

Hi im working with acer v5-122p with black screen. i think is bios issue , but this machine have MX25L3205D chip my programmer have problem so read the chip ok but cannot erase it , all 2 programmer ezp and tl866 this problem persist only with these chip MX25L6005d and now with this chip too. i have 2 socket sop8 and same problem .

any suggestion or someone can suggest me to bay another eeprom programmer?

[ala_borbe]

Re: EZP2010 and minipro TL866A problem erasing MX chip

most likeley eprom is faulty
look on another dead board for other

[gcomputers]

Re: EZP2010 and minipro TL866A problem erasing MX chip

I dont have this chip exatle but can i put any other model compatible

[ala_borbe]

Re: EZP2010 and minipro TL866A problem erasing MX chip

yes

read this thread

https://www.badcaps.net/forum/showthread.php?t=33846

[raajkumar]

Re: EZP2010 and minipro TL866A problem erasing MX chip

I am having Same problem on TL866CS. It show overcurrent protection when i am flashing a 1.8V chip. Thereafter it is not erasing any chip and when it finishing programming it shows a error message and it says programming stopped. Any person can help me.

[raajkumar]

Re: EZP2010 and minipro TL866A problem erasing MX chip

i tried more than 15 chips all are same message.