EZP2010 and minipro TL866A problem erasing MX chip

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • gcomputers
    Badcaps Veteran
    • Apr 2013
    • 509
    • Albania
    #1

    EZP2010 and minipro TL866A problem erasing MX chip

    Hi im working with acer v5-122p with black screen. i think is bios issue , but this machine have MX25L3205D chip my programmer have problem so read the chip ok but cannot erase it , all 2 programmer ezp and tl866 this problem persist only with these chip MX25L6005d and now with this chip too. i have 2 socket sop8 and same problem .

    any suggestion or someone can suggest me to bay another eeprom programmer?
    Tags: None
    • ala_borbe
      aka Donald
      • Apr 2011
      • 1625
      • Malta
      #2
      Re: EZP2010 and minipro TL866A problem erasing MX chip

      most likeley eprom is faulty
      look on another dead board for other
      Im Back... sort of...

        Comment

        • gcomputers
          Badcaps Veteran
          • Apr 2013
          • 509
          • Albania
          #3
          Re: EZP2010 and minipro TL866A problem erasing MX chip

          I dont have this chip exatle but can i put any other model compatible

            Comment

            • ala_borbe
              aka Donald
              • Apr 2011
              • 1625
              • Malta
              #4
              Re: EZP2010 and minipro TL866A problem erasing MX chip

              yes

              read this thread

              https://www.badcaps.net/forum/showthread.php?t=33846
              Im Back... sort of...

                Comment

                • raajkumar
                  Badcaps Veteran
                  • Mar 2015
                  • 354
                  • Srilanka
                  #5
                  Re: EZP2010 and minipro TL866A problem erasing MX chip

                  I am having Same problem on TL866CS. It show overcurrent protection when i am flashing a 1.8V chip. Thereafter it is not erasing any chip and when it finishing programming it shows a error message and it says programming stopped. Any person can help me.

                    Comment

                    • raajkumar
                      Badcaps Veteran
                      • Mar 2015
                      • 354
                      • Srilanka
                      #6
                      Re: EZP2010 and minipro TL866A problem erasing MX chip

                      i tried more than 15 chips all are same message.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • acedogblast
                          Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
                          by acedogblast
                          This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

                          There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
                          11-02-2024, 05:13 PM
                        • SMDFlea
                          Common SPI bios chip programming Questions and Answers
                          by SMDFlea
                          Common SPI bios chip programming Questions and Answers
                          ----------------------------------------------------------

                          Q: I have a bios request,i can`t post my backup as i can`t read from the chip.

                          A: If you can`t read from it how do you expect to write to it ?.

                          Q: Why is my bios chip unreadable ?.

                          A: The programmer is faulty or has a worn or broken zif socket.

                          The USB cable is frayed,connector pins worn or some other physical damage.

                          Not enough amperage or voltage to power the programmer properly.

                          Bad...
                          09-02-2021, 04:40 PM
                        • BMCappelletti
                          Asus Chromebox CN62 - wrong chip put on BIOS reader
                          by BMCappelletti
                          Long story short:
                          - dad converted Asus Chromebox CN62 into Windows compatible, with mrchromebox BIOS, years and years ago
                          - gave the computer to his son a couple years later
                          - son now decided to revert it to Chrome OS, to sell it as original (re-writing BIOS with the backup one created by his dad)
                          - too lazy to remove the board from the case, thought a voltage regulator was the BIOS chip (you know... it has 8 legs)
                          (seems like the story was not that short)

                          He used alligator clips to read the chip. No luck reading it. Removed chip and placed on a SOC-8...
                          01-08-2025, 07:27 PM
                        • Troystain
                          Help EZP2023+ updated chip database for w25q256jveq?
                          by Troystain
                          Hello, anyone here have updated ezp2023+ chip database in .dat file format.

                          I need to add w25q256jveq chip but I do not know what data should I type.

                          I'm using the ezp chip dabase editor posted from here https://www.badcaps.net/forum/troubl...ro-programmers

                          The currenty unit model that I am trying to detect is HP elitebook 640 g9 which is currently locked on admin bios....
                          11-25-2024, 12:53 AM
                        • inck243
                          Acer e15-e5-576g-5762 bricked. Bios chip won't interface in AsProgrammer.
                          by inck243
                          Thanks for any help. The board version is DAZAARMB6E0 REV: E. The bios chip is winbond 25Q64JVSIQ1736. W25Q64JV is not available in AsProgrammer -- only BV CV FV or FW_1.8c. The chip won't interface with asProgrammer and a CH341A. When I have this chip on the board, the laptop will not post but when I plug it in to power, the blue LED lights up, also the orange when the battery is connected. When I push the power on button, keyboard backlight turns on and the fan starts briefely then turns off. But I can't do anything to program this bios chip so I bought another one.

                          The BIOS...
                          07-25-2024, 09:17 AM
                        • Loading...
                        • No more items.
                        Working...