Honton HT-R490 3 Zone BGA Rework Station

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • polytek
    Badcaps Veteran
    • Dec 2013
    • 496
    • TUNISIA

    #1

    Honton HT-R490 3 Zone BGA Rework Station

    hi,
    any idea about this machine, i want to buy new bga station,
    someone have buy this product , i want your advise about it.
    thanks
  • passete
    Living=Sharing
    • Jun 2015
    • 487
    • France

    #2
    Re: Honton HT-R490 3 Zone BGA Rework Station

    3 zone are the best, i own a Scotle 360 V3 and this is a beast !

    Comment

    • polytek
      Badcaps Veteran
      • Dec 2013
      • 496
      • TUNISIA

      #3
      Re: Honton HT-R490 3 Zone BGA Rework Station

      thankyou passete,
      i have two ir6000 for 4 year ago , and they are not precise, despite they have thermocouple k,
      always i need to adjuste the profile. thatsway i decide to buy new one.

      Comment

      • passete
        Living=Sharing
        • Jun 2015
        • 487
        • France

        #4
        Re: Honton HT-R490 3 Zone BGA Rework Station

        With my V3, i always use hot air on Top, with the right size nozzle, then i can adjust +/- 10° on the fly, using the Top Hot air potenciometer, 1 profille fits almost all

        Comment

        • polytek
          Badcaps Veteran
          • Dec 2013
          • 496
          • TUNISIA

          #5
          Re: Honton HT-R490 3 Zone BGA Rework Station

          ok , i will order 3 zone, and i see the Hot Plate for reballing, but i'm not sure about this ;
          http://www.amazon.com/HT-1212-Reball.../dp/B00GN1ERJ0

          Comment

          • diif
            Badcaps Legend
            • Feb 2014
            • 6978
            • England

            #6
            Re: Honton HT-R490 3 Zone BGA Rework Station

            Originally posted by polytek
            ok , i will order 3 zone, and i see the Hot Plate for reballing, but i'm not sure about this ;
            http://www.amazon.com/HT-1212-Reball.../dp/B00GN1ERJ0
            Seems expensive, I paid about £70 for mine from Aliexpress or maybe ebay, i forget.

            Comment

            • passete
              Living=Sharing
              • Jun 2015
              • 487
              • France

              #7
              Re: Honton HT-R490 3 Zone BGA Rework Station

              Originally posted by polytek
              ok , i will order 3 zone, and i see the Hot Plate for reballing, but i'm not sure about this ;
              http://www.amazon.com/HT-1212-Reball.../dp/B00GN1ERJ0
              I can do the same with my station, no need for this !
              But it's your £$€ ...

              Comment

              • vinceroger69
                Badcaps Legend
                • Mar 2012
                • 6714
                • uk

                #8
                Re: Honton HT-R490 3 Zone BGA Rework Station

                http://de.aliexpress.com/item/HONTON...337859461.html

                Comment

                • polytek
                  Badcaps Veteran
                  • Dec 2013
                  • 496
                  • TUNISIA

                  #9
                  Re: Honton HT-R490 3 Zone BGA Rework Station

                  thanks a lot for the link.

                  Comment

                  • polytek
                    Badcaps Veteran
                    • Dec 2013
                    • 496
                    • TUNISIA

                    #10
                    Re: Honton HT-R490 3 Zone BGA Rework Station

                    Originally posted by diif
                    Seems expensive, I paid about £70 for mine from Aliexpress or maybe ebay, i forget.
                    alright, friend i will forgot this,

                    Comment

                    • sopik78
                      Badcaps Veteran
                      • Nov 2013
                      • 517
                      • Czech Republic

                      #11
                      Re: Honton HT-R490 3 Zone BGA Rework Station

                      I own HT-R392, which uses the same heaters as I can see on pictures. It is really amazing reworkstation, you will love it. Hot air is much better than IR, much accurate and you will never see popcorned chips.

                      Comment

                      • polytek
                        Badcaps Veteran
                        • Dec 2013
                        • 496
                        • TUNISIA

                        #12
                        Re: Honton HT-R490 3 Zone BGA Rework Station

                        thankyou friend, for advise, i will order this honton.

                        Comment

                        Related Topics

                        Collapse

                        • shahnld
                          wds-580 rework station issue
                          by shahnld
                          Good day.
                          i received used bga rework station wds-580 which was not going above 300c despite the parameter was set to 350c, Everytime beeps at 300c so i did a factory reset and by mistake washed data and log etc. now the station boots to a white screen.

                          Does anyone has a firmware for this station and want to share with me. i will really appreciate any help possible..

                          kind regards...
                          03-28-2024, 01:14 PM
                        • minimania
                          Need Schematic for jbc am6800 rework station
                          by minimania
                          hi all im looking for a Schematic for jbc am6800 rework station
                          mine has stopped working fully
                          it started with turning off when switched on then after a few off and ons it worked sort of for awhile
                          now it wont turn on at all...
                          01-28-2025, 03:44 PM
                        • shahnld
                          Seamark ZM-R6200 Rework station
                          by shahnld
                          Good day Experts.

                          I have recently aquired a rework station SEAMARK ZM-R6800,. Is there anyone using this or some other similar station and give me some info about profile temp curve etc for removing leadfree soldered gpu chip..? just 1 profile will be enough to get started.

                          Kind regards
                          01-24-2024, 10:55 AM
                        • petemanuk
                          Help with IR6500 rework station
                          by petemanuk
                          Hi,

                          I been playing with a recently acquired IR6500 rework station and watching lots of YouTube tutorials to see how to use it with not much success. I’ve only recently joined badcaps but going through the forums there is a lot of knowledge here, so though it best is if I ask my question here.

                          1. Firstly is the IR6500 any good for BGA rework or should I be spending my money on a better one.

                          2. The instruction manual is pretty useless on explaining how to set the PID loops (no information at all!!) both top and bottom heater for th Kp, Ki and Kd...
                          10-14-2022, 12:31 AM
                        • howardc64
                          Vizio E55-F1 dark backlight zones. LED failure or Dimming Zone Driver?
                          by howardc64
                          Problem

                          Fixing a dimming zone TV with LEDs not lighting up. Dimming zone circuit introduces added variable to diagnose LED and/or Dimming Zone Driver board? Some 1/2 rows of LEDs appears to be out in active dimming zone off AND some brightness flickering with active dimming zone high while playing changing video



                          Model & Board Pics



                          Conflicting Spec

                          Vizio indicate this TV has 10 dimming zones. However, LED strips and Zoned light driver connector suggest 12

                          https://www.shopjimmy.com/vizio-gj-2k1...
                          10-10-2024, 01:16 PM
                        • Loading...
                        • No more items.
                        Working...