Re: a1278 board 820-2936-b doesn't charge
post voltage on battery connector pins.
post voltage on battery connector pins.
-
-
Re: a1278 board 820-2936-b doesn't charge
measure between
pin 1, 2, 3 ( positive ) with pin 4,5 ( negative ) = 11.80v
pin 1,2,3 ( positive ) with pin 6 ( negative ) = 8.60
pin 1,2,3, ( positive ) with pin 7,8,9 ( negative ) = 11.80v
i hope you understand meAttached FilesComment
-
-
Re: a1278 board 820-2936-b doesn't charge
don`t forget to help me , realy need to fix this board.Comment
-
Re: a1278 board 820-2936-b doesn't charge
these are without battery? (strange voltage), now post voltage with battery and power supply and if it was with battery, now post voltage with only power supply.Comment
-
Re: a1278 board 820-2936-b doesn't charge
ok , see photo , witing for help
voltaje with battery and no charger, is the same with battery and charger.Attached FilesLast edited by angel-boy; 01-28-2016, 02:09 AM.Comment
-
-
Re: a1278 board 820-2936-b doesn't charge
please. i`m in a hurry to fix thisComment
-
Re: a1278 board 820-2936-b doesn't charge
come one , realy cannot help me ?Comment
-
Re: a1278 board 820-2936-b doesn't charge
Hello , anyone else has solved this problem with this boardComment
-
Re: a1278 board 820-2936-b doesn't charge
Please provide password?Comment
-
Re: a1278 board 820-2936-b doesn't charge
Can someone please please help me out with the .BRD board view file for the 820-2936-A as the .RAR file will not open for some reason.. thank youComment
-
Re: a1278 board 820-2936-b doesn't charge
The rar archive works fine. Try using PeaZip or 7-Zip on Windows, or unrar on Linux for example.OpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
Re: a1278 board 820-2936-b doesn't charge
any solution for this issue?Comment
-
Re: a1278 board 820-2936-b doesn't charge
Open a new thread to describe your specific issue in as much details as possible.OpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
Re: a1278 board 820-2936-b doesn't charge
Good morning all,
I just looked at all the posts but I haven't found the solution to my problem yet.
I have a 2011 MBP with a board of 820-2936B
It works well except for the battery charge and the charge indicator green light on the side of the MBP.
The problem is the battery does not charge and the green charge level indicators do not light up.
When the macsafe is plugged in, the green LED lights up and turns red during pends 4s then it goes back to green with or without battery.
I replaced ISL6259 but nothing always changed the same failure.
I checked the resistance R5280 input and output = 3,468V
I checked the resistance R5281 input and output = 3,468V
I checked the resistance R7051 input and output = 12.4V
I checked the resistance R7052 input and output = 12.4V
I measured at Q7055 terminal 1,2,3 = 12,4V
terminal 4 = 12.37V?
terminal 5 = 5v which drops to 0V?
By testing in diode mode on SMC_BSA_SDA = 0.492 ohms
and SMC_BSA_SCL = 0.480 ohms
on CHGR_BGATE = 12.37V instead of 5V?
Does anyone have a solution to my problem thanking you
thank youComment
-
Re: a1278 board 820-2936-b doesn't charge
SMC faulty
SMC remove then u will checkComment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
All left and right refers to looking from rear of TV (or looking from front with TV upside down)- TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
- Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
-
Hello, I am looking for any and all files related to the mainboard for 820-2565-A (13" Macbook Pro A1278 mid 2012) schematics/board view.
I looked through forum search results and google and was unable to find a board view file, I found a pdf of all the schematics but I don't know where the parts physically are on the board as this is my first macbook board level repair attempt.
The macbook charger has a green light, the battery has been replaced and OS reports Normal status but Not charging. After cleaning a corroded capacitor it crumbled off the board. There... -
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
Comment