Toshiba DABLBDMB8E0 Led blinking on power on

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • voulios
    New Member
    • Sep 2015
    • 3
    • Greece
    #1

    Toshiba DABLBDMB8E0 Led blinking on power on

    Hello friends,

    I have a toshiba Mainboard DABLBDMB8E0, REV E. It is a water damaged laptop. Once i power it on, the third led is blinking for three times and then it does nothing.
    It seems like a short circuit but I don't know how to start finding it.

    Actions I've taken:
    1. Clean all ics with isopropyl alcohol
    2. Dried with a hot airgun.

    Any help or sugestion is welcome. Thank you
    Tags: None
    • ReeceyBurger123
      Never Give Up !
      • May 2014
      • 7325
      • Britain
      #2
      Re: Toshiba DABLBDMB8E0 Led blinking on power on

      Do you have a DMM you can use it to find out which voltage rails could potentially have a short on them ?
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

        Comment

        • voulios
          New Member
          • Sep 2015
          • 3
          • Greece
          #3
          Re: Toshiba DABLBDMB8E0 Led blinking on power on

          How to start measuring the rails ? Could you please tell me what to check first ? Is there a methodology your follow?
          Which parts/lines should i check first?

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              ORIGINAL POWER SUPPLY BOARD
              7 Photos
              11-22-2024, 01:46 PM
            • PantherDave
              Microsoft Surface Pro (5th gen) model 1796 - no power
              by PantherDave
              Hi all!

              I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

              I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
              https://www.badcaps.net/forum/troubl...-hardware-devi...
              05-29-2024, 02:01 PM
            • GLISIT
              Asus Probook P5440UF-XB74 power issue
              by GLISIT
              Hi all,

              TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


              I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

              A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
              01-16-2025, 02:29 PM
            • sam_sam_sam
              Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
              by sam_sam_sam
              I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

              One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
              03-31-2024, 02:12 PM
            • OMWANA1966
              Toshiba Satellite C850-B888 Standby Power Blinking
              by OMWANA1966
              I have the above toshiba which worked on by another technician with blinking light on the caps lock dvd rom drive and the standby power upon insertion of the charger.

              what i have done

              cleaned the mb

              used hot air

              disassembled the board but the problem is same

              anybody with similar problem which has been solved can assist

              thanks
              04-13-2023, 12:04 AM
            • Loading...
            • No more items.
            Working...