Hi, I hope someone can help with my problem. I have replaced a DC jack on a Samsung NP3530EC, something I have done a few times on this model alone. This time however the laptop wouldn't turn on or charge, its at this point I noted two very tiny components burned out close to the jack. When I touched them with tweezers they just fell off the board! I have quite a few faulty motherboards from various laptops hanging around that could be used to donor components, however I would really like to know what the components were and if replacement is possible.
Picture attached.
PS I am reasonable with a soldering iron.
Thanks in advance
Picture attached.
PS I am reasonable with a soldering iron.
Thanks in advance
i didnt notice first picture , the broken ones , are capacitor , just remove then t usually does 2 coils right near does capacitor , usually also get damaged . so you must have 19 volts on both sides of does coils . if they dont have voltage (this are the ones i mention you can bridge ) the small ones you CAN?T bridge them or else you short 19 volts line to gnd |
Comment