acer 4750G JE40 dead unit

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • salawayon
    Badcaps Veteran
    • Nov 2012
    • 578
    • philippines
    #1

    acer 4750G JE40 dead unit

    This unit is totally dead. No 3.3v and 5vdc output at PU4103, no switch voltage, no supply at bios chip... this unit got a nvidia video chipset.. BTW, i already replaced PU4103 from a working unit with same result. And the original PU4103 being placed to other unit and it works... input voltage (19vdc)at pu4103 is ok..

    Any info where should i begin?

    Thanks
    Tags: None
    • meritosari
      Senior Member
      • Oct 2010
      • 774
      • Indonesia
      #2
      Re: acer 4750G JE40 dead unit

      -measure resistance respect to ground at PL4101 and Pl4102
      -voltage all pin PU4103?

        Comment

        • brotherCPScom
          New Member
          • Dec 2016
          • 3
          • Indonesia
          #3
          Re: acer 4750G JE40 dead unit

          koi

            Comment

            Previous template Next

            Related Topics

            Collapse
            • double_DD
              How can I be sure that my EC chip is dead?
              by double_DD
              Hi all,

              As the title suggests, how can I be sure that my EC chip is really dead?

              I've recently gotten into this hobby of laptop repairs, and have successfully brought back to life a couple with some easy fixes, mostly shorted caps.

              Now I'm working on HP Probook 455 G8, that had some "devil" run around on 3V line, burning a bunch of stuff. Luckily I have a dead 455G7 (for spare parts) so I managed to fix it (swapped burned parts) to a point that it will charge (both on barrel jack and usb-c), but it doesn't want to turn on. There is a 3V3 on a keyboard...
              03-12-2025, 07:47 AM
            • ngml
              Repair of an LG split AC system indoor unit PCB
              by ngml
              I am trying to repair an LG split AC indoor unit, which does not start and gives a CH05 error code.
              This indicates an error in the communication between the outdoor and the indoor unit.
              The outdoor unit is fine, so the problem is the indoor PCB.
              The indoor unit is an LG PC09SQ NSJ (3SNM09JA2FA), and the PCB has the following type number: EAX35907219-1.2 (see photo1)
              I changed optocouplers ICO1X & ICO2X and the NPN transistor S9013 which drives optocoupler ICO2X (see photo2), but this did not remedy the fault.

              Does anybody have the schematics of this board,...
              2 Photos
              02-01-2025, 12:55 PM
            • CoinCoin88
              Garage door RX unit (Cardin S38C) does not short relay to send opening signal
              by CoinCoin88
              Hello everyone,

              I'm turning to the Badcaps community to help me troubleshoot the radio Rx card from my (old) garage door opener. While I could just ditch that card and replace the whole system, I first would like to understand "why" it suddenly stopped working, because that's just how I am wired...!

              Some basics: the receiver works on a 30.875 Mhz frequency. Yes, I'm aware this is not in use anymore in a looot of places. It does not use any rolling code, it's just a regular dip-switch code that you have to set up on both the receiver and transmitter. The receiver...
              09-15-2025, 03:36 AM
            • DrDos
              Unit runs but no speaker output kenwood KR-6030
              by DrDos
              I have finished my work. The new lights come on except the one for stereo, I reversed the bulbs to no affect, anyway, the unit powers on, relay clicks. I have no DC voltage in speaker outputs, I also do not have any AC in the speaker outputs. There is some faint crackling in the speaker. This unit cranks up loud so I had the volume on very low. Everything seems to be fine but I can't really check the switch until I can get sound out of the outputs. I was going to do caps for the power supplys and the tone board but thought if it was cranking loud at one time maybe just leave it alone until it...
              1 Photo
              09-14-2025, 09:57 PM
            • disorder
              ps5 edm-033 dead after hdmi/usb ports destroyed
              by disorder
              hello guys,

              i need help to repair a edm-033 ps2
              history : as always hdmi port and usb ports destroyed after unplugged
              after change them, ps5 dead too : 1 beep, no blue light. after inspection 1.8v power was shorted, and because of dead panasonic chip. after remove it : no short anymore
              so i changed it
              now i have got 5v stby,, 3.3v stby, 3.3v power, 1.8v power and no short on them
              but the ps5 is dead again : 1 beep, near 10 seconds with power lines and then off, no blue light ...

              i don't see any projection of liquid metal on pcb.
              ...
              01-14-2025, 12:48 PM
            • Loading...
            • No more items.
            Working...