HP 1000 Dead

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sonunigam
    Senior Member
    • Aug 2013
    • 151
    • Pakistan
    #1

    HP 1000 Dead

    Hello friends,
    I'm in a big headache. Actually i was working on a HP 1000 motherboard, Eventually the motherboard was getting hot. I did test with Multimeter, the motherboard was totally short. I checked the capacitors and finally i found 4 capacitors 470uF were short under the processor and 1 MOSFET AON7406. I changed all 4 capacitors and 1 MOSFET AON7410 replaced with AON7406, but when i plugged the charger, the charger light off and 2 capacitors under processor and 1 MOSFET AON7410 short again. I checked everything but there is no shortage more, but again when i replaced all those parts and plugged in the chargers the situation happened again. I don't know what the fuck is happening?
    One more thing, Can anyone tell me that AON7410 is compatible with AON7406?
    Please help me out otherwise customer will gonna kill me. . . . .
    Tags: None
    • kuldeep
      Member
      • Sep 2013
      • 30
      • india
      #2
      Re: HP 1000 Dead

      check mosfet gate for shorting if short replace gate drive controller IC

        Comment

        • sonunigam
          Senior Member
          • Aug 2013
          • 151
          • Pakistan
          #3
          Re: HP 1000 Dead

          Hello all,
          Now i did get rid off shortage because there was a shortage in Q6220 (FDMS7692). When i change this MOSFET and all the shortage gone. Now i'm facing a new situation, that there is no display. I don't know how to check that Ram is okay or another part. I've checked ram but ram is good. I've also changed U6600 (TPS51650RSLR_QFN_48 Pins) but no success. Can anyone tell me which is the faulty component?
          Thanks

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Jane
              How do you test MOSFET in laptops ?
              by Jane
              I tried to use this method:

              Testing an N-channel MOSFET:

              Step 1: Discharge the Gate (turn off the MOSFET)
              Place the black probe (COM) on the Source (S) and the red probe on the Drain (D). The multimeter should show no continuity (high resistance or "OL" – open line).
              Then, touch the black probe to the Source (S) and the red probe to the Gate (G). This discharges any stored charge in the Gate, turning the MOSFET off.

              Step 2: Charge the Gate (turn on the MOSFET)
              Now, place the red probe on the Gate (G) and the black probe on the              ...
              09-27-2024, 03:31 AM
            • roxboy1984
              Dell E5530 completely dead and MOSFET getting HOT! Please help.
              by roxboy1984
              Hi,

              So I'm trying to fix the above mentioned dell laptop. It has no signs of life at all when plugged in. If I connect the AC I noticed the MOSFET PQ5 gets very hot. So I'm assuming there is a short somewhere. I'm still learning so please could someone assist me. Thanks for any help given.

              I did try swopping the Mosfet which is a AO4423 with one from a donor board being a SI4483ADY as they both have the same VDS @ 30V. once I swopped the Mosfet when I plugged in the charger it would just switch off so I swopped the MOSFET back....
              11-02-2022, 12:28 PM
            • Nooy
              VGA MOSfet permanently shorted and loss of MOSfet pad
              by Nooy
              Hello everyone, I recently found this badcaps site and super Learn Electronics Repair youtube channel. And I wanted to learn how to troubleshoot power supplies and VGA cards and how to practice soldering, since I already have a properly defective piece of them. I am currently trying to solve two problems:

              I have a Gigabyte GV-RX460WF2OC-4GD type card. I managed to find the faulty MOSfet (AON6414A) on it, which I replaced. The card starts up, but after about half a minute, the MOSfet in the same position will be shorted again. Is it possible that the PWM controller driving the MOSfet...
              02-14-2024, 02:26 AM
            • redbaron1007
              Help identifying mosfet on Razer Blade RZ09 (CH570_MB_NT)
              by redbaron1007
              I have a Razer laptop (RZ09 MB# CH570_MB_NT) that has a shorted mosfet marked BND M03 E067 that I'm unable to find anywhere online. Does anyone either know what the part number is for this mosfet or have a schematic I can find it in?

              Backstory on the whole thing the laptop was plugged into a lamp at a hotel. The lamp got unplugged while it was charging and now the system won't power on anymore. I found the caps around this mosfet shorted and when I injected voltage into the caps the mosfet got hot and my bench psu was pulling 5A. Pretty sure this is all that's wrong with the laptop...
              1 Photo
              09-09-2025, 11:10 AM
            • Document Archive
              Microsoft Surface Laptop Microsoft Surface Laptop Studio, 14.4", 1000 GB, i7, 32 GB, RTX, Wifi, Switzerland/Lux, Platinum, W11P Hybrid (2-in-1) Studio Specification for Upgrade or Repair
              by Document Archive
              This specification for the Microsoft Surface Laptop Microsoft Surface Laptop Studio, 14.4", 1000 GB, i7, 32 GB, RTX, Wifi, Switzerland/Lux, Platinum, W11P Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Microsoft Surface Laptop Studio, 14.4", 1000 GB, i7, 32 GB, RTX, Wifi, Switzerland/Lux, Platinum, W11P boardview and Microsoft Surface Laptop Studio, 14.4", 1000 GB, i7, 32 GB, RTX, Wifi, Switzerland/Lux, Platinum, W11P schematic. Our users have donated over...
              09-07-2024, 04:10 AM
            • Loading...
            • No more items.
            Working...